Nowadays the rolling stock is equipped with electric drive of high power. Frequency turning regulation, motor protection from overheating and limitation of starting currents are made with the help of semiconductor elements. For reliability improvement of starting and regulating facilities it is reasonable to use low component count. Running through regulating facilities current decrease simplifies electric circuit configuration. The authors propose to use thermal resistors as main elements. In the article the authors examine construct specifications of polycrystal temperature dependent semiconducting resistances of coaxial type and their advantages. There are some theoretical propositions which describe the work of thermal resistors and also some algorithms for synthesis of coaxial type starting devices. The authors made mathematical modeling for starting devices of different types based on thermal resistors. In the article there are some graphical dependences describing starting process.

Keywords: high power thermal resistors, thermal resistors of coaxial type, current density, specific generations of heat, criteria of similarity, starting device, starting current, synthesis of starting devices

Considered clean water in swimming pools, on nonionic and anionic surfactants with special adsorbents. Water purification pools plavatelnyx unique, first of all, because the water contains various types of pollution, which it is exposed. Most of these contaminants are introduced by the users of the swimming pool and they have to be removed or destroyed (bacteria, viruses, organic, sweat, hair, makeup, etc.). Treatment of swimming pool water is much more complicated because of the need to carry out her many times, than drinking water treatment, which is carried out one-time. Based on these studies, given technological solution to improve the efficiency of purification of circulating water in swimming pools, ensuring high environmental and economic performance of water treatment.

Keywords: recycling of water, swimming pools, surface-active agents (surfactants), azotoammoniynye organic compounds (AOC), a rapid method of analysis

The values the frequencies of the stretching vibrations of nitrit-, nitrat- and perclorat- anions in molten salts of alkali metals and their point group symmetry. There is a correlation with an increase in the frequency of symmetry.

Keywords: frequency Raman spectra, Raman spectra, melts, nitrites, nitrates, perchlorates of alkali metals, binary salt system frequency Raman spectra, Raman spectra, melts, nitrites, nitrates, perchlorates of alkali metals, binary salt system

Nowadays, the main way to improve power density is increasing the junction temperature of semiconductor devices and as a result, increasing the temperature of the heat sink. This results in a lower efficiency due to the high temperature caused by increasing power losses. To solve this problem, it’s possible to develop the heat sink for a specific system, or to optimize existing heat sink profiles. This paper presents an FEM-analysis describing thermal behavior of a bidirectional switch used in a direct matrix converter.

Keywords: bidirectional switch, heat exchange, thermal behavior, finite element method

Studied mobility planar four-link mechanism of the manipulator in a predetermined area of the workspace. A method for determining the maximum rates for selected destinations for the mechanisms of manipulators with motor redundancy.

Keywords: own properties mechanisms manipulators, mobility manipulators, robots for the synthesis of movement velocity vector

There is discussed an influence of n-p-n HBT scaling on its RF performance in the article. The behaviour of cut-off and maximum frequency of DUT at the transition from 0.18 um down to 0.09 um BiCMOS technology is demonstrated, its dependence from construction and technological variations of the heterojunction bipolar transistor, as well. It was shown, that the approach called "direct" scaling appeared to be inappropriate as a frequency-increase method and some constructive and technological recommendations were discussed, including Ge profile shape, impact of deep collector implantation dose and cap-layer thickness.

Keywords: silicon-germanium, SiGe HBT, BiCMOS, RF performance

The material provides an analysis of cross-cutting issues of tactics of interrogation of persons with mental disorders; The author focuses on the fact that investigated the problem is quite complex in terms of legal, criminological, criminal law, medical-social and psychological aspects. The purpose of research - the study of tactical and procedural features of interrogation of persons with mental disorders. Methods. The methodological basis of the study constitute a universal method of knowledge, reflecting the dialectical relationship of theory and practice, as well as other proven methods of scientific research: the method of theoretical analysis of the sources of the problem, analysis and synthesis, induction and deduction, sociological, psychological and statistical methods (study and analysis of the content of the materials criminal cases and statistical data, questionnaires, survey). Results. Thus, analyzing the modern ideas of scientists and practitioners concerning the use of the terms "mental disorders", "mental illness", "mental deficiencies" and so on., We can conclude that it is more correct to use the term "mental disorder"; defects psyche available to all categories of persons under interrogation, it is a very complex and diverse phenomenon and should be the subject of study sciences such as criminal law, process, criminology, criminal law enforcement, forensic psychiatry and criminology; legal psychology.

Keywords: interrogation, interrogated category interrogated, mental disorders, mental defects, types of examination, symptoms of mental disorders, ability, disability

Importance of cooperation of universities with machine-building enterprises from the point of view of an intensification of creation of objects of intellectual property is shown in article. The description of the valve design developed by authors for the main pipeline which allows to provide compensation of excessive pressure in an internal cavity when finding a lock in a closed position and heating of the case of a valve is given. The described design of a valve can be used as shutoff valves on pipelines of nuclear power plants, thermal power plants, main oil and gas pipelines.

Keywords: valve, main pipeline, pipeline fittings, pipeline transport.

Now the technical condition of residential buildings 60s buildings has reached a high degree of wear when you want to repair their mass implementation of energy rehabilitation of housing and upgrading. This scientific article describes the organizational and technological features of the energy rehabilitation of housing built in the 60s of XX century. The article describes the main types of series of houses built in the period of their technical features of buildings energy efficiency class of buildings. A model of information resource and technological ensuring energy rehabilitation of housing, on the basis of which the selection of energy-efficient solutions of residential buildings at the pre-stage reconstruction or repair. The major elements of this system are the blocks of economic and technical evaluation of design decisions on the basis of which is determined by the most effective ones.

Keywords: organizational and technological support, the organization of repairs, energy conservation, energy efficiency

The article reflects the modern problem of logging process relating to the development of hard-to-forest areas. A perspective for the development of hard-to-forest areas. Given the basic logistics for transporting wood using airships. A mathematical model to describe the performance of the airship to transport timber.The proposed mathematical model to determine the performance of airships in the development of hard-to-forest areas allows: to evaluate the effectiveness of airships in the development of different types of forest areas, choose the best option in the logistic scheme of transportation of timber, and therefore choose the technological equipment, to an economic assessment of the transport component of the timber with airships.

Keywords: Airship, wood transport, processing equipment, productivity, cycle time, logistics

The universal computerised complex for determination of quality characteristics of a dispensing of seeds by the apparatus of precise seeding is observed. The processing method of loggable signals is presented. The observed complex, with application of a metering equipment and a processing method of the data, allows to size up quality of operation of the sowing apparatus of precise seeding. In particular to define allocation of feed of seeds to which refers to droppings, one-piece feeds, two-piece feeds and feeds of the higher order. Also by means of a complex registration of amount of dosing elements and total of the gived seeds for experience is simultaneously led.

Keywords: seeding, dispensing, sensor, registration, sound card, signal, dropping, feed, seeds, sowing apparatus

Abstract: Operation of motor transport and special equipment is carried out in difficult conditions, the impact of environmental conditions (temperature, humidity, dust, wind, solar radiation) and changes in modes of operation of the machine. This affects the performance of equipment, the number and complexity of repairs. Away from fixed bases (in the field), the problem is particularly acute repairs. One of the most energy-intensive and expensive works are welding (welding parts with a break, welding cracks, fusing metal layer on the worn surface, metal cutting). In this work the welding equipment affect the voltage drops in the supply mains, therefore, produces a large number of failures such equipment. After the equipment is accompanied by an increased amount of electric power consumption, this results in material costs. Previously proposed equipment has improved mass, which reduces the efficiency of the welding. Based on this study was proposed innovative design welding inverter using the resonance effect, with enhanced reliability, low-cost design version (in terms of mass production). In order to improve the reliability and reduce the cost of the proposed design of inverter proposed a number of new approaches. Full-bridge inverter is studied welding power source with the implementation of the resonance effect with a stable and smooth operation, high reliability, because the circuit of the inverter is not sensitive to changes in the supply voltage.

Keywords: construction machinery, parts, low temperatures, thermal state, measurement, monitoring, control, sensor, hardware-measuring system

based on an analysis of the methods and schemes snow removal from roads and sidewalks it revealed that there is a snow plow, which would be cleaned in a single pass only the side of the road in the middle of the road cleared. At the same time to solve this problem are also two cars. In accordance with this work set a goal: increasing productivity snowplows. To explore this issue were based on the analysis of working bodies of snow plows developed and investigated a new type of dump actuator for snow removal from roads. It was determined that there is an additional resource to increase machine productivity. This is achieved by improving the design of the working body. This will not increase the resistance of the machine, because proposed symmetrical design with rotating blade and sliding half, which will reduce the resistance and to ensure stability.

Keywords: snow machine, snow removal from roads, snow removal scheme with roads, blade, working body

The results of experimental studies to determine the optimum frequency of rotation of the drum and the optimum ratios of the mechanical gear Electromechanical actuator gravity mixers. Recommendations on the use of different types of actuators depending on the scope of use of the machines.

Keywords: "gravity concrete mixer, Electromechanical actuator, modular design, experiment, mixing drum rotational speed, induction motor, reducer "

The possibility in principle of using pulp and paper industry waste as a binder for pelletization flotation potassium chloride bases on conducted researches. Defined technical conditions of pelletization flotation potassium chloride using pulp and paper industry’s waste as binder provide product with good commercial qualities, which are yield of marketable fraction (85.71 %) and resistance of granule (29.51 N). The researches for studying conditions of baking were conducted and subsisted defects on granule surfaces. There are two kinds of defects. One of them is inner defect is represented as caverns and flaws. Another type of defects are outer defects. They are represented as crystallized structural arrangements in the form of coreless tube that has net structure and includes fiber and cubic shaped microcrystals. Granule defects form after baking them with temperature higher than 120ºC.

Keywords: flotation potassium chloride; pulp and paper wastes; adhesive; commodity characteristics of fertilizers, defects granules