We have considered the improvement of analytical formulas for the determination of bending moments in a single-span beam with semi-rigid nodes. We have obtained analytical relationships for deflections, angles of rotation, bending moments and shear forces in a single-span beam with semi-rigid nodes. A convenient coefficient from 0 to 1 is used to specify the intermediate stiffness node. The coefficient characterizes the fraction of possible rotation of the support node. When we derived the formulas, we used the assumption of constant bending stiffness of the beam along its length and linear deformation of the beam material under load. We did not consider the cases of loading the beam with concentrated forces and concentrated bending moments in the span. We realize the complexity and necessity of calculating beams with semi-rigid nodes, so we have created a table for easy calculation. In the table you will find the values of the supporting moments depending on the degree of possible angle rotation. With the information about the bearing moments, you can load the hinged beam with them and construct a bending moment diagram. The upper left and lower left values from the table are used to determine the bending moments at the supports. The upper right and lower right values of the table are used to determine the bending moments in the beam span.
Keywords: semi-rigid nodes, multilayer structures, calculation methods, contact zone, wooden beams, reinforcement, wood, reinforcement, environmental friendliness