In this work researches of structural and electrophysical properties of ferroelectric films of lead zirconate titanate (PZT) which afterwards is planned to apply in hybrid sensor systems are done. Values of capacities of the received samples are in the range from 200 to 1100 pF, the range of thickness of the received films is 300-1000 nanometers. X-ray analysis showed direct dependence of the quantitative maintenance of crystalline PZT in film structure from partial pressure of oxygen in the camera. By results of research the range of polarization of samples are in the range 0,06 – 2,2 µC/cm2, and values of calculated piezoelectric modules are in the range 0,04*10-12 – 13,3*10-12 C/N.

Keywords: sensors, segnetoelektric films, touch systems, piezoelectric modules.

The article investigates the impact on the normal stresses of inequality of the young modulus for tension and compression in the bending of reinforced beams. Obtained formulas for determination of the bending moments that arise in the fixture, compressed and stretched zone of the aggregate. Found the formula for the normal stresses arbitrarily supported reinforced beams, arbitrary cross section and arbitrarily loaded bending loads. For example, reinforced beams of rectangular cross-section shows the determination of the neutral line and maximum stresses.

Keywords: reinforced beam, elastic modulus, stress, normal concrete

  In this article the mathematical model dynamic process installations for blast cleaning the surface, and clearly showed the graph of the transition process, given the theoretical integer parameters yield in the specific process conditions.

Keywords: Fluid Technology, a dynamic characteristic of the drive, nozzle - gate, jetting processing surface

  The requirements to be met by a data acquisition system in terms of each of the problems to be solved. Presented electric concept developed biopotential amplifier with a total gain of 2000. The theoretical model of the spectrum of RR intervals and changes depending on the running processes. The analysis revealed that the resulting spectrum satisfies the conditions considered in the theoretical model, and can be further analyzed with fractal characteristics.

Keywords: Instrumental amplifier, biopotential, fractal index

  The purpose of investigation is to examine the effect of adaptation to difficult-house physical stress on the regulation of the vertical posture of man. For the analysis of the ability to maintain a vertical position used stabilographic hardware-software complex "Stabilan-1-02" (JSK Rhythm ", Russia). The ability to maintain a vertical position was evaluated in two static positions: 1) the main stand (OS) in the presence and absence of visual information, and 2) dip (PP) in the presence of visual information. Revealed that an increase of physical performance ability to maintain balance in static positions, especially in the complicated conditions (deprivation of visual information and static muscle tension) increases.

Keywords: Sports stabilometry, adaptation, vertical pose

Technique for measurement of inductances (L) about 1 nanohenry or less one, is discussed. Two measurements of inductance L are executed. First one is executed for stub length l0, another - for stub length, shortened into N times. Formula for calculation of unknown inductance’ error has been obtained, where determination of unknown L with error closed to meter error has been succeeded by choice of parameters. It is shown that required measurement’s error of initial stub length for N=2 and N=5 is in tens micrometers’ range. Techniques for error’s diminishing have been considered. Estimation for basic stub length of 6,6 mm and 8,3 mm for N=2 and N=5 respectively has been executed. 

Keywords: inductance, least-squares procedure, meter error, stub base

The author of the article identified the cadastral value of land horticultural non-profit organizations of Leningrad region, using the method of geostatistics. Determined by the maximum distance between objects evaluation. Point at a distance lag more than the maximum distance, not spatially correlated. The construction of the cadastral value of the surface, using deterministic methods and methods of geostatistics is illustrated.

Keywords: cadastral value, geostatistics, log, correlation, regression

 In the article there are considered the problems arising in the building of systems of diagnostics and recognition, provides methods to detect deviations in functioning of the various objects.

Keywords: Diagnostics, еmpirical mode decomposition, extreme filtering, time-frequency distributions

In presented article rank criteria for the statistical analysis of two selections are considered. These criteria check statistical hypotheses. Three groups of rank criteria were considered: about equality of the central tendencies, scopes of a variation and distribution laws. Researches were conducted on data on exchange rates in two next days in nine banks. Correctness of criteria was estimated proceeding from an US dollar exchange rate established by the Central bank of Russia. To these data rank criteria of Wilcoxon, Van der Waerden, Kolmogorov-Smirnov and others were applied rubbed. Coinciding values of two selections were estimated by means of a method of an average rank. For all examples rank criteria gave the correct assumptions of equality of two selections.

Keywords: statistics, rank, sample, hypotheses statistical, critical value, normal distribution, the interfaced couples

Seed damage has a negative impact on the subsequent development of the plant, its yield, and generally on the economic efficiency of grain production. Main percentage of the grains injury occurs in the post-harvest processes, particularly in the grain cleaning. One way of solving this aim is reducing of macro and micro damage of seeds by using   of the   new polymeric materials. Researches have been conducted to reduce the micro and macro of injury barley seeds (feed material) through the use of  new sieves made of polymeric materials UHMW PE  for agricultural machinery.

Keywords: polymeric materials, micro and macro damage, reducing injury of the seeds

"This article describes modeling of uniform system of design and technological preparation and production. The mathematical model is based on base of the theory of probability, the theory of mass service and mathematical statistics. Its basis is markovsky casual process. If the stream of events at the enterprise is stationary, without a consequence and ordinary, this process is called the elementary. The average size of a flow of information of each service is determined by the law of distribution of Erlanga, the stream density is determined by the enterprise, and production transition from a condition to a condition of shops and productions is estimated. When modeling a flow of information on movement of information and details at the enterprise classification of divisions was offered. After the analysis of their activity and a flow of information, details and documents the state graph of uniform system of design and technological preparation and production is constructed. Transitions were thus described and factors are appropriated. For each condition of system of a state graph limiting probabilities of conditions were calculated and Kolmogorov's equations are worked out. At integration of data of systems of the equations the probability of conditions of activity of divisions and production as time functions during every moment of time is defined."

Keywords: system of design and technological preparation and production, state graph, Markov process, state probability, coefficient, Kolmogorov's equations

Circuit features of the electronics module for avalanche photodiode signal read-out, created on a basis of the specialized analog IC, are considered. Measurement re-sults of characteristics and noise depending on signal source capacity are given.

Keywords: avalanche photo diode, readout electronic, charge sensitive amplifier, shaper, electronics module

A design of the actuator, consisting of a thin layers of silicon dioxide and aluminum is proposed. There are calculations made of the response speed and heat dissipation of the actuator. By making the best selection of layer thicknesses and optimization stages of technological process, in particular the deep selective etching of silicon, the best performance on the angle of inclination of the actuator and the speed of the device could be achived. The greater the difference between the initial temperature and the heating temperature, the stronger the beam of the actuator is lowered to the plane of the silicon plate, and, therefore, less angle of elevation above the surface of the silicon plate. It is thus possible to control the angle of the beam by selecting the appropriate heater and voltage, providing the desired temperature. The design of the micromirror device based on the proposed actuator is provided. The developed design is based on the actuator and allows for controling the tilt of the mirror in a wide range.

Keywords: silicon, termoactuator, micromechanical systems, bimorph structure, micromirrors

This paper addresses the testing results of steel rods with grade A500 and A600, which used as a conventional reinforcement. It was investigated the strength properties of carbon and fiberglass sheets with different number of material layers. The results are compared with the data given in the quality certificates.

Keywords: fiberglass, carbon frp sheets, laminates, sheets of carbon and fiberglass, the ultimate load ,strength

The paper reports on dynamical model of optimal biological resource exploitation with corruption. Particularly, it is allowed a fish quota increase after paid a bribe. The research has been realized with the sustainable development conception by the Pontryagin's maximum principle. A time moment, where the bribe is profitable, is considered. Fight corruption methods are presented.

Keywords: Mathematical model, optimal exploitation, corruption