This article describes the developed tool for creating a report on the effectiveness of sales channels for the hierarchical structure of sales channels. The developed model for the report on sales channels takes into account the type of source, the criterion for the freeness of the sales channel, the source of traffic and the source of customers themselves. The ROI is estimated and customer conversion activity data is tracked. The article also describes the results of the implementation of the model and its use.

Keywords: sales channel, meta-information, contextual advertising, call tracking, ROI, Google AdWords, Yandex.Direct

Considered several locations the bus station located in the city of Rostov-on-Don, and their location in urban areas. In the process of continuous urban growth and the construction of new housing estates, suggested to build a new avtovokzalnogo complex includes the station building itself, as well as the building of the hotel with car parking.

Keywords: bus, "model projects", "individual projects", Fibonacci spiral, bionics, shell-Nautilus

In this article is reviewed the nature of organic hybrid nanocomposites. Promising directions in the field of organic hybrid nanocomposite materials will be methods for the synthesis of multicomponent materials, as well as the type of "net net" and "host-guest". The fundamental problem with the chemistry and physics of nanocomposites is dependent "structure-property". Solving this problem will move from research materials to their purposeful design.

Keywords: nanocomposite sol-gel technology, synthesis, nanoparticles.

This paper considers basic element of device of energy storage which is a piezoelectric generator (PEG) of cylindrical form with the attached inertial mass. A finite element modeling of the device operation is carried out during active load in the external circuit. The main purpose of the operation is to compare the output potential and frequency characteristics of the device known in the literature models of systems with concentrated parameters. On the basis of these models, we can receive the analytical dependence of parameters of PEG with its geometric characteristics and mechanical properties of the used materials. However, the question of the range of applicability of these formulas is still open. In this paper, based on the numerical analysis of finite element models of PEG in package ANSYS, we obtained comparison with the analytical formulas that show the values of some parameters of simplified models and set the boundaries of their applicability.

Keywords: energy storage, PEG, piezoceramics, effective mass, resonant frequency, FEM

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties

The catalytic activity of Pt/C and PtxNi/C electrocatalysts prepared by  borohydride methode was studed. It was established that the specific activity  of fresh prepared Pt3,7Ni/C  catalyst  in oxygen  electroreduction  reaction is higher in compare with Pt/C material. After treatment of Pt3,7Ni/C material in the hot acid  nickel in the surface layers of nanoparticles was dissolved and the composition of nanoparticles was changed to Pt5,6Ni. The electrochemical surface area of the Pt5,6Ni catalyst and specific activity was slightly decreased after corrosion treatment. 

Keywords: platinum electrocatalysts, corrosion stability of the nanoparticles, fuel cells, X-ray diffraction, borohydride synthesis

With the use of pulsed laser deposition and carbothermal synthesis а photosensitive structure on the basis of the Schottky barrier Au/ZnO(nanorods)/ZnO(film)/ZnO(nanorods)/Au was obtained. The parameters of the carbothermal method of synthesis of nanorods ZnO were optimized. Under directly applied bias of 7V current sensitivity of luminous flux for this photodetector is observed in the UV and visible regions of the spectrum, and is 0.14 A/W - for 325 nm and 0.18 A/W - to 405 nm, which means that this structure has the ability of potential applications in various fields for the control of UV radiation (for example, for the monitoring of solar UV radiation, control of UV radiation in air and disinfecting water devices).

Keywords: ZnO nanorods, Schottky barrier, photodetector, photosensitivity

ZnO nanorod arrays have been synthesized on silicon wafers by chemical vapor deposition (CVD) technique with different  temperature modes, without metal catalyst.  With this method   vertically aligned ZnO nanostructures  were grown at the quite low temperatures.  Modification of the method allowed to place silicon substrates in areas with different  ratios of concentrations of the molecules in the vapor phase. Photoluminescence spectroscopy and electron microscopy studies have shown that morphologies and optical properties of nanorods depends on different ratios of concentrations of the molecules in the vapor phase.

Keywords: ZnO nanorods,chemical vapor deposition (CVD), photoluminescence

Advantages of being self-сщьзсештп concrete of the lowered density (LSUB) before heavy and light concrete are shined, characteristics of components ЛСУБа and influence of their quantitative contents are provided in a mix on properties of the fresh and hardened concrete. The optimum mode of warmly moist processing is offered.

Keywords: Self-compacting concrete, the supersoftener, knitting, filler, a volcanic tufa.

The short review of existing panoramic systems are given. The limits of such systems doesn't allow to form a panoramic video with dealing the parallax effect in real-time systems. The presented algorithm for forming a panoramic video is free of these disadvantages. An algorithm based on mathematical model of the round-view system that takes into account the location of cameras, their intrinsic parameters and model of the world. The algorithm includes following chain of coordinate transformation: from panoramic image coordinates to spherical coordinates and to Cartesian world coordinate system, from world coordinates to camera coordinate system and to input image coordinates. Geometric distortion of camera is dealt. Model of the world is represented as spherical and a hemispherical surfaces.

Keywords: panoramic image, round-view video system, camera model, camera distortion, parallax

  Laboratory technology was developed to fabricate flexible piezocomposites with ferroelectric phase - polymers having signal reception factorv • gv 5000 • 10-15 m2 / N. The values of the given coefficient were achieved by switching from a probabilistic (spontaneous) percolation to a correlated one in the process of forming material. This made the production of 0-1–3 piezocomposites, in which a part of piezophase has 0 connectivity, and the other part – 1 connectivity possible. To improve the efficiency of piezocomposite polarization before their manufacturing the surface of piezophase particles, which were obtained by the partial destruction of the porous frameworks, was treated with coupling agent, which did not only improve the polymer adhesion to piezophase, but also allowed the removal of water from the particle surface. The latter effect reduced the value of interfacial conductivity, i.e. prevented the voltage drop of the polarizing field. Matching of polymer conductivity and piezoceramic particles by determining the optimal polarization temperature was carried out as well.  

Keywords: piezocomposites, percolation, connectivity, electrophysical properties

The titanium dioxide synthesized by an electrochemical method is a perspective material for use in solar elements and catalysts of cleaning of water and air environments. Regularities of electrochemical synthesis of titanium dioxide in glycerin dilute solutions (1:1) in the presence of ammonium fluoride at 2-14 V are investigated. Mathematical scheduling of synthesis process according to plans of first order with use of the complete three-factorial experiment is carried out, the adequate regression equations for formation processes of a titanium dioxide in the field of potentials 8-14 V are received. The electron microscopy method proved porosity of synthesizable layers of titanium dioxide. Water content influence in electrolyte on the speed of electrochemical process and potential size influence on titanium dioxide materials yield is established. It is shown that under the chosen electrolysis conditions electrochemical process is accompanied by the considerable chemical disolution of a titanium. Electrochemical processes in water containing glycerin are investigated by a cyclic voltammetry method. It is established that at electrochemical oxidation of Ti in water containing glycerin (1:1) porous TiO2 with a materials yield no more than 25% is formed.

Keywords: titanium, titanium dioxide, electrochemical oxidation, glycerin, ammonium fluoride, experiment scheduling