The structural properties of cobalt catalysts and their active component are studied. The influence of metal oxides on the specific surface area, pore volume and size, the average crystallite size and the active surface area of the catalyst Co-Al2O3/SiO2 was studied.

Keywords: Fischer-Tropsch synthesis, synthetic hydrocarbons, catalyst, cobalt, promoter, carrier, specific surface, porous structure, catalytic activity, degree of reduction, active surface area

The physical and chemical properties of cobalt catalysts promoted by manganese oxides for the synthesis of hydrocarbons by the Fischer-Tropsch method are studied. The influence of polymorphic modifications of the alumina carrier on the specific surface area, pore volume, degree of reduction, size of cobalt crystallites,catalytic activity, dispersion degree of catalyst reduction is considered.

Keywords: Synthesis of Fischer-Tropsch, synthetic hydrocarbons, the cobalt catalyst, promoter MnO2, the carrier of Al2O3, specific surface area, the degree of recovery of the catalytic activity, dispersion, and the crystallites of cobalt

The parameters of the porous structure and the active surface of cobalt catalysts for Fischer-Tropsch synthesis (SFT) prepared by the impregnation method have been studied. Characteristics of composition and porous structure were studied using elemental analysis and the Brunauer-Emmett-Taylor method (BET). The effect of the addition of oxide promoters on the specific surface area, pore volume and pore size of the Co / SiO2 catalyst has been studied.

Keywords: Fischer-Tropsch synthesis, heterogeneous catalyst, promoter, carrier, specific surface area, porous structure, selectivity, activity, dipping method

The parameters of the porous structure and the outer surface of cobalt catalysts for the synthesis of Fischer-Tropsch, promoted by magnesium, prepared by the impregnation method according to moisture capacity, were studied. The effect of polymorphic modification (γ, θ, α) of the carrier on the physicochemical properties of the catalyst Co-Mg / Al2O3 was studied.

Keywords: Fischer-Tropsch synthesis, polymorphic modifications of Al2O3, synthetic motor fuel, catalyst, carrier, elemental analysis, BET method, specific surface, porous structure

Three batches of Co-MxOy / SiO2 catalysts were prepared with different methods of introducing an oxide additive. Physicochemical studies of catalysts by elemental analysis and Brunauer-Emmett-Taylor (BET) methods have been carried out. The effect of additives of oxide promoters and the method of their introduction on the specific surface, volume and pore sizes for Fischer-Tropsch synthesis catalysts were studied.

Keywords: Fischer-Tropsch synthesis, carbon-containing resources, catalyst, active component, silicate carrier, Al2O3 and ZrO2 promoters, elemental analysis, BET method, surface area, volume and pore size

Using the methods of thermo-programmed reduction (TPV) and thermo-programmed hydrogen desorption (TPD H2), physico-chemical studies of Co-MxOy / SiO2 catalysts obtained by various methods of introducing a promoter additive were carried out. The effect of the introduction method and the nature of the promoting oxide additive on the properties of the active component of the Fischer-Tropsch synthesis catalysts was studied.

Keywords: Fischer-Tropsch synthesis, catalyst, active component, silicate carrier, Al2O3 and ZrO2 promoters, TPV and TPD H2 methods, crystallite size, degree of reduction, dispersity

The physical and chemical properties of cobalt catalysts for Fischer-Tropsch synthesis have been studied. The effect of copper and iron oxides on the specific surface, pore volume and dimensions, and the degree of reduction of metallic cobalt on the surface of the Co-Al2O3 / SiO2 catalyst have been studied.

Keywords: Fischer-Tropsch synthesis, synthetic hydrocarbons, catalyst, cobalt, promoter, carrier, specific surface, porous structure, catalytic activity, reduction degree

The dispersion parameters of the active component of cobalt catalysts promoted by nickel for Fischer-Tropsch synthesis by the temperature-programmed hydrogen desorption method (TPD H2) were studied. The influence of the polymorph (γ, θ, α) of the support on the physicochemical properties of the Co-Ni / Al2O3 catalyst was studied.

Keywords: Fischer-Tropsch synthesis, biomass, catalyst, support, Ni promoter, polymorphic Al2O3 modifications, TPD H2 method, active surface, dispersity, cobalt crystallites

The parameters of the porous structure and the outer surface of cobalt catalysts for the Fischer-Tropsch synthesis prepared by the water-impregnation method were studied. The effect of the polymorphous modification of the support on the physico-chemical properties of the Co / Al2O3 catalyst was studied.

Keywords: Fischer-Tropsch synthesis, synthetic motor fuel, catalyst, carrier, promoter, polymorphic Al2O3 modifications, elemental analysis, specific surface, porous structure

The parameters of the porous structure and the active surface of cobalt catalysts for the synthesis of liquid and solid hydrocarbons (Fischer-Tropsch synthesis) prepared by the method of impregnating a silicate carrier were studied. The effect of additives of oxide promoters on the specific surface, the volume and size of pores, the dispersion and size of crystallites of metallic cobalt on the surface of the Co / SiO2 catalyst was studied.

Keywords: Fischer-Tropsch synthesis, motor fuel, synthetic hydrocarbons, catalyst, promoter, carrier, specific surface, porous structure, catalytic activity, selectivity