The article is devoted to the issue of improving the environmental safety of highly urbanized territories. The article presents the results of field measurements of pollutants into the atmosphere from gas stations within the urbanized territories of cities of the Russian Federation. The largest part of the allocation of oil product vapors entering the local aspiration systems is associated with the operations of filling and emptying fuel storage tanks at gas stations. The results of field measurements of the values of hydrocarbon concentrations obtained on the basis of the values of maximum permissible concentrations of ingredients are presented. The conclusion is drawn on the feasibility of environmental protection measures to reduce emissions when finding housing in the border area of the sanitary protection zone (SPZ) of gas stations. To reduce emissions from gas station sources, it was proposed to equip the gas aspiration system of the gas feeling tank with an improved design of the absorption device. In order to reduce waste generation as a working agent in such devices, it was proposed to use wastewater with a certain amount of oil products from a local gas station treatment device. This approach also allows to reduce the negative anthropogenic impact of gas stations in terms of the formation of additional amounts of waste generated during their operation. Successful tests have shown reliable and efficient operation of the pilot plant with the proposed apparatus.

Keywords: gas station, gasoline, emission, atmosphere, concentration, hydrocarbons, aspiration, reservoir, pollution, oil product, pollution, water

he article is devoted to the question of selection of aerodynamic parameters of drying in the apparatus of the filtered-fluidized bed of dispersed particles – carbon-black containing wastes materials and granules of sodium salts in solution of modeling problems. The design of the studied gas pressure distribution grid fluidized bed of dispersed materials of the tray kind provides the possibility to efficiently fulfill the drying process at relatively low speeds of the drying agent. It is allowed to reduce the removal of particles of material from the bed and its exhaust into the atmosphere. The average flow rate of gas motion and the number of fluidization for the main stages of the filtered-fluidized bed of the studied materials and aerodynamic parameters (drop pressure losses) are determined. It was found the fluidization number in the range 1.25-1.5 and the bed height was about 0.25 m. The total aerodynamic drop pressure losses of the dispersed materials’ bed and had acceptable meanings within range from 90 to 130 kg / m2. For the recommended range the coefficient was equal 30-45. Data were obtained on the phases of fluidization, the values of the aerodynamic parameters of drying, and the areas of operating conditions that provide a fairly uniform circulation of the material in the layer and reliable operation of the apparatus.

Keywords: modeling, drying, waste, dispersed material, fluidization, bed, velocity, aerodynamics, pollution, atmosphere