The influence of the amount of the addition асфальтогранулята on the properties of asphalt mixes and asphalt. Also considered is the impact of technology of filing асфальтогранулята on physical-mechanical properties of asphalt mixes.

Keywords: old asphalt, asphalt, astringent, physico-mechanical properties, homogeneity.

the analysis of foreign researches, which consist of processes of functioning timber lorries is given. Decrease transport expenses with minimization of empty run of timber lorries and formations of rational structure of this park has been proved.

Keywords: timber lorries, functioning

The nano-catalyst ceria (CeO2), activated by Pt nanoparticles, is known for being prospective and efficient material widely used in catalysis, fuel elements, and sensors. One of the most up-to-date methods of catalysts' reasearch is X-ray absorption spectroscopy (XAS) that is sensitive to the chemical state of catalyst's active centers [1,2]. Using XAS in the fluorescense detection mode at CeL1 line with high precision we studied electronic structure of Pt-activated nanoparticles of ceria at various redox conditions. In order to detect partial X-ray fluorescence yield the emission line CeLγ3 was used, which allowed us to increase spectral resolution. We researched local atomic and electronic structure of the materials under study. Oxygen vacansies were found to appear on the nanoparticles surface of ceria at 5% CO He atmosphere. Theoretical modeling of the obtained spectra at CeL1-edge demonstrated good agreement with experiment.

Keywords: X-ray absorption spectroscopy, HERFD, XAS, Ce-based catalysts, oxygen vacansies

The return coefficient task of determination of properties of a construction design by means of the device of neural networks is considered. As model the neural network in the form of a polutorasloyny predictor with possibility of iterative accumulation of volume is taken. Each subsequent step connected with addition of a new stream of neurons, is carried out only after training of the previous stream. Coefficients of synoptic communications pay off with the help of procedure of the return distribution from a condition of a minimum of function of an assessment. Algorithms of the solution of direct and return problems of multidimensional approximation are developed.

Keywords: neural network, approximation, synoptic communications, return distribution, construction designs

The article discusses issues related to the study of the influence on the deformability of concrete beams of heavy concrete reinforcing steel to replace the carbon fiber arranged in two rows. Found that delamination of the composite beams with reinforcement throughout the range of loads up to 46-54% compared with the reference.

Keywords: concrete, steel, carbon-fiber reinforcement, test samples, strength, steps of loading, deformability, cracking, load level

In conditions of reduction of the costs of wastewater actual value of the minimum speed and current case does not provide the required conditions of self-purification of networks. The studies conducted on the silt areas of current collectors of various diameters made of various materials with the purpose of determining the resistance of precipitation in the trays pipes.
Describes the methodology and instruments of research. The data obtained allowed with sufficient certainty have established roughness coefficient bottom sediments of sewers.   

Keywords: drainage network, the rate of self-purification, sewer, roughness, bottom sediments.

Damage control cables in electrical phenomenon is quite common. To prevent cable replacement great lengths in serviceable there is a way to repair it, previously requiring a definition of the place of damage. In this case, you must apply a number of methods to determine the place of circuit lived or their place of breakage. In this case, knowing the resistivity lived control cable can be determined by bridges DC. Methodology and methods of measurement of resistance lived control cables are discussed further in the article.

Keywords: Bridge DC, shops resistance, the sensitivity of the bridge

Reconstruction of buildings inevitably entails improving the thermal protection of premises, however, the development of measures for the thermal insulation of the existing building structures is impossible without evaluation of thermal characteristics of these structures, primarily the resistence to heat transfer. Evaluation of the materials according to their characteristics reference is often not possible. The main causes is the lack of information about construction materials to the inner layers of the long-erected buildings. Arise a number of difficulties in conducting field surveys due to the practical absence of the stationary conditions. Heat flux on the surface can change simultaneously with changes in temperature, as walling have thermal inertia, and need some time to change the temperature distribution in the structure thickness. To determine the actual heat transfer resistance of enclosing structures must take into account the dynamics of change of temperature and heat flow on the surface of the enclosure. When determining the actual heat transfer resistance needs to consider the time distribution of heat waves through the walling.

Keywords: non-stationary thermal conditions, cladding, thermophysical characteristics, thermal resistance

In this paper, the synthesis of a trajectory regulator for a mini-helicopter are described. We propose a method to hardware-in-the-loop simulation using simulator AerosimRC. The simulation results are showed. The tasks for the application of the method are pointed.

Keywords: position-trajectory regulator, helicopter, mathematical modeling, simulation, algorithms.

A hybrid reverberation algorithm is offered in this article. This algorithm is using both a convolution section in which a convolution with an inmpulse response of a real acoustic room is being implied and a mathematical reverb model. Also an algorithm for generating impulse responses of optional rooms is also offered in the following article. The algorithm efficiency calculation is  specified in the article. Thia reverberation algorithm is a part of a bigger complez auralization algorithm where it is being used coherently with an HRTF-based algorithm in order to simulate a real acoustic environment  

Keywords: artificial reverb, room simulation, convolution algorithm, impulse response convolution, impulse response synthesis, dynamic convolution, complex filtering

This article describes the method of application of the General совокупносте final volume instead of custom information in the calculation of fatigue life of parts. For descriptions of statistical regularities used вероятсностные laws with a shift. The parameters of Weibull distribution are graphically.

Keywords: the General totality of the final volume, the sample resource calculation, fatigue

Considered part of the software and hardware designed and manufactured the device for the automatic analysis of nonlinear parameters of high-temperature superconducting ceramics YBa2Cu3O7-x in variable magnetic fields. Shows the calibration and specifications. The new is a synchronous (the error in determining the phase of no more than 0.5%) of digital signal samples of the nonlinear response of the sample and the samples generated by an external magnetic field (the error is less than 1%), with the number of data samples per channel to 90 ∙ 106 12-bit samples and sampling 600 ∙ 103 samples per second. The reference range of variable magnetic fields 1 - 50 Oe, a frequency range of 1 - 50 kHz in steps of 1 Hz and the accuracy of 0.0291 Hz. The device has an interface to the computer via two USB-interface and original software to work with it. With the use of the device, a series of experiments designed to produce some non-linear parameters of cylindrical sample made of high-Tc ceramic YBa2Cu3O7-x. The analysis of the results and their comparison with the presented in the literature  

Keywords: Nonlinear medium, high-temperature superconducting ceramics, synchronous samples, harmonics, ARM-9 CPU, a differential sensor.

The article presents the results of calculations of reinforced concrete columns of high-strength concrete on the SNiP and SP. Compared the results with experimental data. The proposed adjustment formulas used with correction factors k and w resulting standard deviation of the bearing capacity of the columns from the experimental reduced more than four times.

Keywords: high-strength concrete, physical experiment, the correction factor calculation scheme undeformed

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

There submitted a HF and SHF field energy density measuring technique developed by authors in this work with application of semiconducting laser interferometer measuring an alteration of a glass plate optical thickness while the plate is placed in the sphere of HF or SHF heating. Operability of the technique is demonstrated by measurement of a microwave oven electromagnetic field energy density distribution

Keywords: laser interferometer, temperature measurement, HF and SHF field sensor