In article mathematical formalization of concept of a lag effect of system as a whole, and in particular a lag effect of the social and economic system arising at studying of processes and the phenomena of a labor market is considered.This property allows to consider a problem of a temporary gap between operating impact and result of change of system of a labor market on this influence.

Keywords: Labor market, lap effect, optimizing tasks, economic-mathematical modeling,operating influence, social and economic system

In conditions of reduction of the costs of wastewater actual value of the minimum speed and current case does not provide the required conditions of self-purification of networks. The studies conducted on the silt areas of current collectors of various diameters made of various materials with the purpose of determining the resistance of precipitation in the trays pipes.
Describes the methodology and instruments of research. The data obtained allowed with sufficient certainty have established roughness coefficient bottom sediments of sewers.   

Keywords: drainage network, the rate of self-purification, sewer, roughness, bottom sediments.

"The mechanical properties of the rubber-cord composite in strengh analysis are described. There is an algorithm of the numerical estimation of the effective (average) properties of the rubber-cord. The effective properties are defined by the successive application of different deformations to the representative volume of the rubber-cord composite (tensions along each coordinate axis and shifts in each cooridinate planes). The effective properties are defined in form of the generalized Hooke's law (for anisotropic materials). A serias of computations in estimatition of the effective properties of double-layer rubber-cord composite was carried out based on the proposed algorithm. The dependence of the effective elastic modules of rubber-cord on the angle of cord was explored. The according graphs are represented in the article."

Keywords: theory of elasticity, effective properties, strength analysis, rubber-cord, numerical modeling, finite element method, CAE FIDESYS

The article represents the description of the construction of increment borer, its present modifications and additional devices. On the basis of the conducted survey the authors of the article defined the ways for improvement of the borer. Suggested technical solutions are at the stage of patenting  

Keywords: Increment borer, preparatory works of forest logging, tree age, forest inventory, core.

Alzheimer's disease is an incurable illness. It affects about half a million people in Russia, and due to the general trend towards aging of the population the number of Alzheimer's disease cases will steadily increase. Insoluble deposits of amyloid beta in the brain tissue (amyloid plaques) are the major morphological characteristic of Alzheimer's disease. It has been found that the increased concentration of copper in amyloid plaques results in copper ions bound to the protein. It is the presence of copper in the binding site triggers of the formation of amyloid plaques. Therefore, the study of the binding site in amyloid beta is of great scientific interest. The local atomic structure of the Cu(I) copper ion binding site in the amyloid beta peptide has been studied by means of XANES spectroscopy. Several model structures obtained by molecular mechanics and density functional theory (ADF code) have been tested. Theoretical analysis of X-ray absorption spectra based on the finite difference method implemented in FDMNES code was performed. An appropriate model structure of the Cu(I) copper ion binding site in amyloid beta peptide has been found.

Keywords: amyloid beta, binding site, Alzheimer's disease, the method of finite differences, Cu(I)

The article is devoted to study proposals for determination of transportation of dangerous goods. Methodology of selection of the most optimal route for transportation dangerous goods is presented and consists of 11 steps, and also includes factors influencing movement goods throughout the roads. The methods allow to decrease subjectivity factors of assessments of transportation risk and, thereby, to reduce probability of choosing a wrong way to move dangerous goods.

Keywords: transportation of dangerouse goods, methodology of movement goods throughout roads, safety, factors of safety moving by roads.

This paper describes an in-situ experimental technique to study of ceria nanocatalysts by using X-ray absorption near edge spectroscopy XANES. This technique allows us to determine Ce3+ concentration inside ceria nanoparticles in the course of catalytic reaction based on the comparison and divergence minimization of the Ce L3 XANES spectrum of the ceria nanoparticles under catalysts (atmosphere, temperature) with a linear combination of two independent components corresponding to spectra of Ce4+ ion of the CeO2 structure and Ce3+ ion of the theoretical Ce2O3 structure. The calculated weight ratio determines the Ce3 + concentration in the sample during the catalytic reactions.

Keywords: in-situ X-ray absorption spectroscopy, HERFD, XAS, ceria nanoparticles, Ce-based catalysts, Ce3+ concentration

The problem of manufacturing technology heterostructures pezofaza - metal considered in the article. Complexity consists in the fact that during the removal of the polymer in the system at low temperatures are formed porous layers, formed powders separated metal layers, having island macrostructure. One way to solve the problem - reducing the firing temperature heterostructures. Proposed to decrease the sintering temperature by using of functionally active glass-phases. Reducing the sintering temperature of products also allows to replace platinum electrodes inexpensive silver-based alloys. Obtained by solid state reaction method of piezoceramic material has a low sintering temperature (980 ° C) and high electrical parameters. Found that not only the proportion of the vitreous mass, but also their qualitative influence on the properties of piezomaterials    

Keywords: heterostructure glass phase, the sintering temperature, porosity, ferroelectric phase

Piezoelectric ceramics on the basis of the phase of (1-x) PbTiO3-xPbZrO3 is the basis of most high-performance piezoelectric materials. Electrophysical and mechanical properties of these materials can vary widely in different ways. Traditional methods include changes in composition within the morphotropic region and doping. Now is the study of the influence of topical makrolegirovaniya the material properties of the PZT system. As a model system was selected phase of the PZT system, the compositions of which MO belong, one of which contains a dopant in the sublattice (A) and another - in the sublattice dopants (B). The studies established that one of the effective ways of varying the parameters piezomaterials may be the formation of solid solutions on the basis of two or more piezoelectric phases having different combinations of electrical parameters  

Keywords: Piezoelectric ceramics, doping, kombinorovanie, pezofaza, piezo

A hybrid reverberation algorithm is offered in this article. This algorithm is using both a convolution section in which a convolution with an inmpulse response of a real acoustic room is being implied and a mathematical reverb model. Also an algorithm for generating impulse responses of optional rooms is also offered in the following article. The algorithm efficiency calculation is  specified in the article. Thia reverberation algorithm is a part of a bigger complez auralization algorithm where it is being used coherently with an HRTF-based algorithm in order to simulate a real acoustic environment  

Keywords: artificial reverb, room simulation, convolution algorithm, impulse response convolution, impulse response synthesis, dynamic convolution, complex filtering

Considered part of the software and hardware designed and manufactured the device for the automatic analysis of nonlinear parameters of high-temperature superconducting ceramics YBa2Cu3O7-x in variable magnetic fields. Shows the calibration and specifications. The new is a synchronous (the error in determining the phase of no more than 0.5%) of digital signal samples of the nonlinear response of the sample and the samples generated by an external magnetic field (the error is less than 1%), with the number of data samples per channel to 90 ∙ 106 12-bit samples and sampling 600 ∙ 103 samples per second. The reference range of variable magnetic fields 1 - 50 Oe, a frequency range of 1 - 50 kHz in steps of 1 Hz and the accuracy of 0.0291 Hz. The device has an interface to the computer via two USB-interface and original software to work with it. With the use of the device, a series of experiments designed to produce some non-linear parameters of cylindrical sample made of high-Tc ceramic YBa2Cu3O7-x. The analysis of the results and their comparison with the presented in the literature  

Keywords: Nonlinear medium, high-temperature superconducting ceramics, synchronous samples, harmonics, ARM-9 CPU, a differential sensor.

An overview of research related to the tasks of processing and filtering of signals. Signal is considered as a random process defined by probabilistic characteristics. This article addresses the issues of the history of the development of methods of signal filtering. Recent scientific publications in which the results and the main directions of research in the field of signal processing and filtering are analyzed. Presented material extends the current state of knowledge about the problem.

Keywords: signal, signal filtering, signal processing, stochastic process

Oxide bronzes MxEO3 (M–Na,K; E – W,Mo) are the inorganic materials for technics and chemical technology. Its properties, for example stability in wide interval of temperatures, are of great practical interest (electrodes for fuel elements, electronic apparatuses  and others).                                                                             In this article the results of studies of thermostability of sodium and potassium tungsten and molybdenum bronzes in atmosphere and vacuum condition at the temperatures range 20-1110°C were found. The samples are prepared by electrolysis of melts of sodium and potassium isopolytungstates and molybdates. Dates for bronzes Na0.92WO3 , Na0.68WO3 , Na0.53WO3 , Na0.15MoO3, K0.3MoO3 were characterized by the termogravimetric-differential- thermal analysis (TG-DTA). Regions of stability of Na0.92WO3 : 20-700°C , of MxMoO3 : 300-500°C were founded. Conclusion about correlation of  nonstoichiometry of chemical composition of EOx bronzes and oxides, which making important role in formation of less - common metal bronzes structure.

Keywords: oxide alkali bronzes, tungsten, molybdenum, thermostability, nonstoichiometry, thermal analysis

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation

The article deals with the analysis of intermittent lanes priority based on simulation. The implementation of intermittent lanes priority system is only possible within the framework of urban intelligent transportation system (ITS).  In some cases, there are not always enough ITS components for the operation of intermittent lanes priority system. Based on the simulation it is possible to determine the efficiency of the intermittent lanes priority system with the minimum or complete number ITS components. To compare the effectiveness of intermittent lanes priority system the simulation was performed for the four scenarios:
1. Without the use of public transport priority
2.  Classically  marked priority lane
3. Using the intermittent lanes priority system with a minimum number of ITS components
4. Using the intermittent lanes priority system with the full amount of ITS components 
According the results of simulation we concluded that the minimal intermittent lanes priority system is noticeably inferior to a fully functional intermittent lanes priority system on the effectiveness, but such system does not require a high level of development of the urban ITS and can be considered as the first stage of a complete intermittent lanes priority system.  

Keywords: the organization of the bus lane priority, priority lane, intermittent bus lane priority, road capacity, controlled road signs, intelligent transportation system