To date, the main method of mass production of advanced functional materials for various purposes is the ceramic technology. In the manufacture of multi-component oxide compounds using of ceramic technology is difficult to achieve high uniformity of chemical composition. For activation of the raw ingredients and make it more uniform use of chemical-tions (co-precipitation of salts or hydroxides, spray drying, Cryochemistry) and physical-tions (mechano-chemical, microwave, ultrasonic) methods. The paper presents the results of work on obtaining Ni-Zn-ferrite 2000NN radiation-thermal sintering. The influence of base composition and alloying additions on the electromagnetic properties of the ferrites. Confirmed the effectiveness of the use of surface-active additives To increase the density of the raw pieces and level parameters. We propose a model that explain schaya efficiency of dopants in the radiation-thermal sintering.

Keywords: Nickel-zinc ferrite, radiation thermal sintering, base composition, alloying additives, permeability

The short review of existing panoramic systems are given. The limits of such systems doesn't allow to form a panoramic video with dealing the parallax effect in real-time systems. The presented algorithm for forming a panoramic video is free of these disadvantages. An algorithm based on mathematical model of the round-view system that takes into account the location of cameras, their intrinsic parameters and model of the world. The algorithm includes following chain of coordinate transformation: from panoramic image coordinates to spherical coordinates and to Cartesian world coordinate system, from world coordinates to camera coordinate system and to input image coordinates. Geometric distortion of camera is dealt. Model of the world is represented as spherical and a hemispherical surfaces.

Keywords: panoramic image, round-view video system, camera model, camera distortion, parallax

Promising absorbing materials along with a Ni-Zn-ferrites are Mg-Zn-ferrites, as they are also intensively absorbs electromagnetic waves in the frequency range from 50 MHz to 1000 MHz. The main advantage of the Mg-Zn-ferrite is used as an inexpensive raw material magnesium oxide. The paper presents the results of research to improve the efficiency of broadband radio-magnesium-zinc ferrite by increasing the contribution of the dielectric loss. The influence of alloying elements of the atmosphere gas and cooling after the sintering thermal radiation by absorption of electromagnetic waves. Confirmed cooling efficiency of products after sintering in an atmosphere with reduced oxygen partial pressure to increase the dielectric constant. A model is proposed to explain the increase in the dielectric loss ferrite during cooling in a reducing atmosphere.

Keywords: radioabsorbing ferrites, microstructure grain boundaries radio measurement radiation thermal sintering

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

The issue of increasing the strength of cutoff and grooving tools is considered in the paper. The principle of strength balance of edge is offered to be used in designing the replaceable inserts. The calculations are made and the shape is designed for the strength balanced front surface of the cutting tools. The analysis of the received data is made and the regularities of the designed shape of the front surface of the cutting edge are established. Designs of replaceable cutting inserts made with a glance to structural characteristics and operating conditions of the cutoff and grooving tools are offered.

Keywords: strength, cutting end, strength balance, cutting end, cutoff tools

The main maintenance of a diversification of production as activity of subjects of managing is considered. being shown in purchase of the operating enterprises, the organizations of the new enterprises, redistribution of investments in interests of the organization and development of new production on available floor spaces. The most important organizational economic targets of a diversification of management are presented by innovative activity of the industrial enterprise.

Keywords: Герметичный компрессор объемного действия, система охлаждения, холодопроизводительность, перегрев, холодильный коэффициент COP, энергоэффективность.

The paper considers the comparison of power consumption of Two’s Complement System and Residue Number System for digital signal processing applications. The comparison of these two implementations allows to conclude that, for these applications, the RNS uses less power than the TCS counterpart. The aim of the present paper is to highlight the reasons of this power consumption reduction.

Keywords: residue number system, digital signal processing

В данной статье приводятся примеры стандартных и не стандартных точек контакта с потенциальными клиентами, описаны механизмы их выявления, а также приведены примеры из практического опыта работы авторов по данной теме. Дано определение понятию «клиентоориентированнсть» с точки зрения клиента, и предложены варианты, где применима данная стратегия. Поднят вопрос о качестве обслуживания и что стоит за этим пониманием для клиента, чего он ждет от сферы услуг и на что рассчитывает. В статье рассмотрены этапы анализа точек контакта, приведены примеры влияния этих точек на формирование лояльного отношения клиента к качеству услуг. 

Keywords: услуга, точки контакт, идентификация, стратегия, анализ, клиент, потребитель, контакт, точки взаимодействия, ориентация на клиента

This paper presents a comparative analysis of the effectiveness of the method Cuthill-McKee algorithm and fill-reducing ordering of a sparse matrix, based on multi-level nested dissection paradigm, developed at the Department of "Computer Science and Engineering," University of Minnesota. For short, we shall call the algorithm Cuthill-McKee CM, and the algorithm of the University of Minnesota — NodeND (Node nested dissection). This article uses a modification of the CM algorithm — RCM (reverse Cuthill-McKee), because in practice the reverse numbering index allows you to get a greater advantage than using a direct algorithm CM. The reason for using these algorithms are high speed computational algorithm, as it is necessary to solve the system proximal to the diagonal, the great acceleration of algorithms for solving FE problems using technology such as CUDA  

Keywords: finite element mesh renumbering methods, three-dimensional mathematical modeling, elasticity theory problems, finite element method, finite element meshes

In article mathematical formalization of concept of a lag effect of system as a whole, and in particular a lag effect of the social and economic system arising at studying of processes and the phenomena of a labor market is considered.This property allows to consider a problem of a temporary gap between operating impact and result of change of system of a labor market on this influence.

Keywords: Labor market, lap effect, optimizing tasks, economic-mathematical modeling,operating influence, social and economic system

Only innovative activity is able to unite all aspects of science, equipment, economy, business and management. The current state of the innovative sphere of Russia speaks about serious contradictions in its functioning. Considerable scientific and technical capacity of the country was lost in the period of economic reforms. Now often it is impossible to predict precisely succession of events in economic life of the country generally and each organization separately. In modern conditions scientific and technical progress represents innovative development which is defined by the state as the most important priority of economic policy. Innovative potential of any managing subject needs to be estimated as difficult social and institutional system. To encourage managers and the production personnel competently developed motivational strategy is necessary to conduct work on search of innovations. Achievement of the put indicators of innovative development of the Rostov region and the country as a whole has to become result of an offered method of interaction of science, business and authorities.

Keywords: innovative activity, scientific and technical potential, economy, business, ideas, effect, development

Cylindering logs are increasingly being applied for construction of houses. Log production are expensive to and is costly application equipment. The article describes the technical and technological solutions allowing to get round the log on the cutting area and at lower cost.

Keywords: cylindering, through technologies, forestry, functional technological analysis

The stated task is development of planning system of energy-efficient trajectories for stratospheric airship. Different intellectual approaches for this task were analyzed. Genetic algorithms were chosen. Results of application of genetic algorithms were considered.

Keywords: MAAT, high-altitude airship, control system, planning, genetic algorithm

We consider the relevance, peculiarities and the main stages of composite developments in the technology of production of finishing materials based on glass and ceramics. The description of technology of production of universal fragments, making the block-transformer. As basic materials for the development of applied chamotte ceramics and glass sheet.

Keywords: composite development, design, manufacturing technology, unit transformer, fireclay, glass

The article discusses issues related to the strength of the normal sections of reinforced concrete beams in which the steel reinforcement is completely or partially replaced by a carbon fiber rod arranged in two rows. Found that the strength of these beams is only 13% higher than that of the reference.

Keywords: concrete, steel, composite reinforcing, test samples, strength, failure modes, load level