The problems of the modification of voltage inverter circuit are considered and using of a DC power source in the realization of function of boosting voltage converter.

Keywords: Active rectifier, voltage converter, inverting converter, multi-channel power supply , the conversion factor.

A design of the actuator, consisting of a thin layers of silicon dioxide and aluminum is proposed. There are calculations made of the response speed and heat dissipation of the actuator. By making the best selection of layer thicknesses and optimization stages of technological process, in particular the deep selective etching of silicon, the best performance on the angle of inclination of the actuator and the speed of the device could be achived. The greater the difference between the initial temperature and the heating temperature, the stronger the beam of the actuator is lowered to the plane of the silicon plate, and, therefore, less angle of elevation above the surface of the silicon plate. It is thus possible to control the angle of the beam by selecting the appropriate heater and voltage, providing the desired temperature. The design of the micromirror device based on the proposed actuator is provided. The developed design is based on the actuator and allows for controling the tilt of the mirror in a wide range.

Keywords: silicon, termoactuator, micromechanical systems, bimorph structure, micromirrors

The paper reports on dynamical model of optimal biological resource exploitation with corruption. Particularly, it is allowed a fish quota increase after paid a bribe. The research has been realized with the sustainable development conception by the Pontryagin's maximum principle. A time moment, where the bribe is profitable, is considered. Fight corruption methods are presented.

Keywords: Mathematical model, optimal exploitation, corruption

Structure and features of biosignals digital processing in measuring convertor of auditory evoked potentials of bioelectrical brain activity are considered at this article. Measuring convertor of auditory evoked potentials of bioelectrical brain activity is the main part of neurological diagnostics systems allowed to obtain information about the current state of the human nervous system. This paper describes the processing method of evoked potentials based on recording and processing a continuous electroencephalographic (EEG) signal. The proposed method consists of three main steps: registration of the EEG signal, segmentation of the EEG signal and the averaging of segmented fragments of the EEG signal.

Keywords: measuring convertor of biosignal, evoked potential of bioelectrical brain activity, biosignal averaging

  Method of an automatic recognition of sleep events is described. The method is based on analysis of amplitude histograms that are built on each of registered channels. The method is designed for sleep events, distinctive feature of which is expressed amplitude change that appears simultaneously on several channels. For example, "General body movement" and "Limbs movement" events. But this is not limited; method can be applied to other events, for example "Snore". Algorithm can be divided into three stages: histograms building and analysis, vertical analysis, results processing.

Keywords: PSG, sleep events, histogram, detection algorithm

In the course of acceptance and implementation of administrative decisions by public authorities the analysis of the existing institutional environment and and the transactional expenses connected with it often isn't made. The analysis of influence of these factors is provided in article on implementation of the project and recommendations about their optimization are made.

Keywords: organizational structure of management, transactional expenses, efficiency analysis

The  researches results of possibility of  equations simplification of ring dynamic, which is based on two bearings with the help of task of special base functions system, in accordance with conditions of  zero transmissions in bearings points are represented. The calculation of the coefficients of the basis functions of a linear function and the polynomial of degree  two and three.

Keywords: ring based on two bearings, zero displacement at points bearings, system of basis functions

High purity ultrafine aluminum nitride is produced by gas-phase approach, however there is an issue to divide AlF3 and AlN at the final step of synthesis. Recently, the problem is solved by sublimation of aluminum trifluoride in vacuum, but due to high temperatures aluminum nitride particles agglomerate into chunks with dimension about 8 μm, hence the new alternate methods of separation is in a great interest. Flotation in organic environment is considered to divide aluminum trifluoride and aluminum nitride. The process of AlN and AlF3 interaction with organic and element-organic matters was investigated and the following conclusions were made: there is agglomeration and sedimentation stability of AlN and AlF3 in organic environments and flotation possibility was experimentally proved, hence, flotation after special treatment is a possible approach to divide powders of aluminum trifluoride and nitride.

Keywords: aluminum trifluoride, aluminum nitride, gas-phase synthesis, aglomeration, sedimentation, sublimation

The problems of visual perception whole object are considered in the paper. As an objective method to explore these issues, are used as incentives figure in subjective contours - Kanizs figures. The survey was attended by eight healthy men (SFU students and staff), right-handed, aged 22 to 35 years. The results of analysis of variance characteristics visual EP, recorded in the perception of different figures, showed that significant differences were found when comparing the real and illusory form with a figure control.

Keywords: Visual perception, Kanizs figures, evoked potentials (EP), dispersion

"Examines the relationship of the concepts on the example of post-war reconstruction of post-war reconstruction of the city of Rostov-on-Don.
In 1945, the Chairman of the Committee on Architecture AG Mordvinov announced seven conditions under which you can create the city.
In 1945, the development of the urban plan of rebuilding the city of Rostov-on-Don was appointed academician of architecture VN Semenov.
In 1949. master plan was finalized at the construction site.
In general, the basic idea of the architect was executed. Among the fifteen cities prone to restore the city of Rostov was restored in all seven conditions put forward by the Chairman and the Committee for Architecture AG Mordvinov, projected architecture academician VN Semenov and given a reality by means of the chief architect of YA Rehbein."  

Keywords: master plan, concept, post-war reconstruction, the condition of the city

The titanium dioxide synthesized by an electrochemical method is a perspective material for use in solar elements and catalysts of cleaning of water and air environments. Regularities of electrochemical synthesis of titanium dioxide in glycerin dilute solutions (1:1) in the presence of ammonium fluoride at 2-14 V are investigated. Mathematical scheduling of synthesis process according to plans of first order with use of the complete three-factorial experiment is carried out, the adequate regression equations for formation processes of a titanium dioxide in the field of potentials 8-14 V are received. The electron microscopy method proved porosity of synthesizable layers of titanium dioxide. Water content influence in electrolyte on the speed of electrochemical process and potential size influence on titanium dioxide materials yield is established. It is shown that under the chosen electrolysis conditions electrochemical process is accompanied by the considerable chemical disolution of a titanium. Electrochemical processes in water containing glycerin are investigated by a cyclic voltammetry method. It is established that at electrochemical oxidation of Ti in water containing glycerin (1:1) porous TiO2 with a materials yield no more than 25% is formed.

Keywords: titanium, titanium dioxide, electrochemical oxidation, glycerin, ammonium fluoride, experiment scheduling

The paper discusses possible options for the use of genre classification results of Web documents in search engines. The proposed methods can improve the quality of search engines.

Keywords: Web document classification, text documents, search engines, search engine results page, search quality, diversity

The conventional methods of a choice of the most effective version of land tenure are analyzed. It is offered to use instead of them an expert method of the analysis of hierarchies. The diagram of a choice of the most effective version of land tenure on the basis of this method is represented. The degree of influence of various factors on a choice of the most effective version of use of the ground on an example of interrogation of experts in a Rostov-on-Don is certain  

Keywords: Assessment, effective, land tenure, methods, expert, factors, hierarchy

  The superposition conception of endogenous factors influence on the hem lymphatic occupancy in the organism vascular system is presented. The main influence factors creating the wave modulation on the pulse blood and lymph flows in the vessels and liquid’s moving in the around tissues are considered in the physical model. On the basis of the model is justified hemodynamic functional test with dosed compression effects on local areas of the body, in which the reaction is analyzed for changes in the spectrum of signals related to the changes exhibited by volume-dynamic changes in the vessels. Shows the functional scheme of the formation of the wave changes hem lymphatic, allowing planning of the study.

Keywords: Hem lymphatic occupancy, endogenous factors, compression action, spectral analyzing of signals

The paper describes the experimental complex designed for impact testing of thin-walled structural elements, as well as the results of experiments on one-time and repeated impact deformation of square plates. The experimental complex uses an induction-dynamic motor as loading device, which allows to conduct repeated impact loading. Impact test were done on thin square steel hinged plates. The time variation of strain components were determined by use of strain gauges and analog-digital converter connected to PC. Experiments on repeated impact loading show that averaged number of cycles to plate's punching is equal to 79 cycles, which coincides to low-cycle area.

Keywords: impact, deformation, fracture, thin-walled structures, plate. Experimental investigations