Article is devoted to strength calculations of compound designs. The deformed condition of the block under the influence of any loading enclosed in its top is considered intense

Keywords: plate, shell, the strength, the composite structure

The article is devoted to the production of thermal efficiency of reinforced concrete construction. A complex technology and keeping warm concrete oformovannyh items in hot water, which reduces the cost of processing products.

Keywords: Concrete, hot concreting, water curing, temperature, energy

Article is devoted to strength calculations of compound designs. The deformed condition of the block under the influence of any loading enclosed in all its tops is considered intense

Keywords: plate, shell, the strength, the composite structure

The article represents the description of the construction of increment borer, its present modifications and additional devices. On the basis of the conducted survey the authors of the article defined the ways for improvement of the borer. Suggested technical solutions are at the stage of patenting  

Keywords: Increment borer, preparatory works of forest logging, tree age, forest inventory, core.

The possibility of combination of wood barking and branches cutting within through technologies of timber industries is shown. Comparison of several such processes is made with the use of functional-technological analysis and hypothesis of expediency of creation of the process technology and equipment for simultaneous group wood barking and branches cutting is formulated.  

Keywords: barking, branches cutting, through technologies, woodworking, timber industry

Alzheimer's disease is an incurable illness. It affects about half a million people in Russia, and due to the general trend towards aging of the population the number of Alzheimer's disease cases will steadily increase. Insoluble deposits of amyloid beta in the brain tissue (amyloid plaques) are the major morphological characteristic of Alzheimer's disease. It has been found that the increased concentration of copper in amyloid plaques results in copper ions bound to the protein. It is the presence of copper in the binding site triggers of the formation of amyloid plaques. Therefore, the study of the binding site in amyloid beta is of great scientific interest. The local atomic structure of the Cu(I) copper ion binding site in the amyloid beta peptide has been studied by means of XANES spectroscopy. Several model structures obtained by molecular mechanics and density functional theory (ADF code) have been tested. Theoretical analysis of X-ray absorption spectra based on the finite difference method implemented in FDMNES code was performed. An appropriate model structure of the Cu(I) copper ion binding site in amyloid beta peptide has been found.

Keywords: amyloid beta, binding site, Alzheimer's disease, the method of finite differences, Cu(I)

To describe the dynamics of the temperature field in the surface layers of the earth taken up the heat balance of the earth's surface. Taken into account are three components of the heat flow: convective heat transfer with air, solar radiation, heat flow from the surface layers of the soil. The boundary conditions on the surface of the soil is considered the temperature of the ground surface, which is determined from the heat balance of the surface layer of the sun radiation. The temperature distribution in the soil is determined using the method of finite differences. A layer of soil has a certain thermal inertia, which leads to delaying the achievement of minimum temperatures in the soil column relative to the time of achievement of the minimum surface temperature. In the surface layer of soil to a depth of approximately 300 mm, is almost complete attenuation of the diurnal temperature fluctuations in the month of June with account of solar radiation in conditions of the South of Russia.

Keywords: heat pump, возобнавляемые sources of energy, solar radiation, transient mode, soil

The problem of manufacturing technology heterostructures pezofaza - metal considered in the article. Complexity consists in the fact that during the removal of the polymer in the system at low temperatures are formed porous layers, formed powders separated metal layers, having island macrostructure. One way to solve the problem - reducing the firing temperature heterostructures. Proposed to decrease the sintering temperature by using of functionally active glass-phases. Reducing the sintering temperature of products also allows to replace platinum electrodes inexpensive silver-based alloys. Obtained by solid state reaction method of piezoceramic material has a low sintering temperature (980 ° C) and high electrical parameters. Found that not only the proportion of the vitreous mass, but also their qualitative influence on the properties of piezomaterials    

Keywords: heterostructure glass phase, the sintering temperature, porosity, ferroelectric phase

In this paper, the synthesis of a trajectory regulator for a mini-helicopter are described. We propose a method to hardware-in-the-loop simulation using simulator AerosimRC. The simulation results are showed. The tasks for the application of the method are pointed.

Keywords: position-trajectory regulator, helicopter, mathematical modeling, simulation, algorithms.

The technique of the geometrical analysis and the analysis of force loading of combined drills with the replaceable multiface plates is offered in this work. This technique is allowing to determine geometrical parameters and specific force loadings in each point of a plate’s cutting edge taking into account its orientation in the drill case. Application of this technique allowed to establish the reasons of the drill’s low durability. The offered technique allows to design drills from the minimum unbalanced radial component of cutting force which increases its working capacity and the processed holes quality. New designs of combined drills both with two, and with three replaceable multiface plates are offered in this work. The durability of this new drills is increased by the plates mutual turn for the minimization of an unbalanced radial component of cutting force  

Keywords: combined drill, replaceable multiface plate, drilling, design, equilibration, geometrical analysis, the analysis of power loading

A hybrid reverberation algorithm is offered in this article. This algorithm is using both a convolution section in which a convolution with an inmpulse response of a real acoustic room is being implied and a mathematical reverb model. Also an algorithm for generating impulse responses of optional rooms is also offered in the following article. The algorithm efficiency calculation is  specified in the article. Thia reverberation algorithm is a part of a bigger complez auralization algorithm where it is being used coherently with an HRTF-based algorithm in order to simulate a real acoustic environment  

Keywords: artificial reverb, room simulation, convolution algorithm, impulse response convolution, impulse response synthesis, dynamic convolution, complex filtering

This article describes the method of application of the General совокупносте final volume instead of custom information in the calculation of fatigue life of parts. For descriptions of statistical regularities used вероятсностные laws with a shift. The parameters of Weibull distribution are graphically.

Keywords: the General totality of the final volume, the sample resource calculation, fatigue

In a modified version of the adaptive clutch size of the spacer strength decreases due to a reduction of torque, which transmits the additional friction group, including, for the maximum value of the friction coefficient. Therefore, to save the value of the brace force is necessary to increase the ratio usileniya.Predlozhena concept modernized version adaptvnoy clutch with a combined feedback based on the formalization of the distribution of power factors for the closure of the main steam friction of the friction and more friction groups, allows you to simplify the design of the coupling compared to the base case  

Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

An overview of research related to the tasks of processing and filtering of signals. Signal is considered as a random process defined by probabilistic characteristics. This article addresses the issues of the history of the development of methods of signal filtering. Recent scientific publications in which the results and the main directions of research in the field of signal processing and filtering are analyzed. Presented material extends the current state of knowledge about the problem.

Keywords: signal, signal filtering, signal processing, stochastic process

"This review covers various methods of synthesis LaMnO3 ferroics. The general analysis of the solid-phase synthesis reactions methods and wet methods (sol-gel, sorption, co-precipitation) are carred out. The original results of LaMnO3 syntheses from various precursors by means of the in situ method are showned. The advantages and disadvantages of different methods of synthesis are determined. The analysis of synthesis LaMnO3 ferroics published data is shown:
- the structure formation of LaMnO3 in perovskite-type phases occurs at different temperatures, depending on precursors states;
- LaMnO3 perovskite phases differ in symmetry and unit cells parameters at room temperature, depending on the preparation conditions;
- the highest synthesis temperature of LaMnO3 are typical for solid phase reactions method (950-1050 ° C), the lowest - for wet synthesis methods (500-700 ° C);
 - the synthesis conditions effect the stoichiometry of LaMnO3 for oxygen content.
Our studies of structure formation processes of LaMnO3 by in situ method are allowed to define the role of precursors states at synthesis of solid phase reactions methods, adsorption, co-precipitation and sol-gel mixtures.
It is determined that in samples prepared by wet chemical methods, the formation processes of  LaMnO3 perovskite phases occur at lower temperatures than by solid phase reaction (sol-gel precursor - 500 <T <600 ° C; precursors obtained by coprecipitation and sorption methods - at 600 <T <700 ° C and 700 <T <800 ° C, respectively).  

Keywords: ferroics, LaMnO3, X-ray diffraction, solid-phase synthesis, sol-gel synthesis, sorption, co-precipitation