×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

  • Electronics module for avalanche photodiode signal readout

    Circuit features of the electronics module for avalanche photodiode signal read-out, created on a basis of the specialized analog IC, are considered. Measurement re-sults of characteristics and noise depending on signal source capacity are given.

    Keywords: avalanche photo diode, readout electronic, charge sensitive amplifier, shaper, electronics module

  • System ammonium purpurate - ammonium nitrate

    The results of differential thermal analysis of ammonium purpurate-ammonium nitrate system have been presented. The samples have been obtained of melt method. At the contents of ammonium purpurate more than 1 % in samples turn up replacement sequence of ammonium nitrate polymorphic transitions has been established.

    Keywords: ammonium nitrate, ammonium purpurate , phase stable, gas-generating composition

  • A model of optimal biological resource exploitation with corruption

    The paper reports on dynamical model of optimal biological resource exploitation with corruption. Particularly, it is allowed a fish quota increase after paid a bribe. The research has been realized with the sustainable development conception by the Pontryagin's maximum principle. A time moment, where the bribe is profitable, is considered. Fight corruption methods are presented.

    Keywords: Mathematical model, optimal exploitation, corruption

  • Construction of a model of equiresistant multispan beams

    Method of successive approximations was used to solve the problem of optimization of multispan continuous beam. Cross section of a beam was a welded I-beam.  By the variation of the width of the shelf we ensured that the maximum equivalent stress for energy theory of strength in each section is the same throughout. The solution is made numerically using complex MatLab. Bearing capacity of beams with variable stiffness along the length increased in 2 times in comparison with the beam with constant stiffness and the same mass. The proposed method can be applied to frames, taking into account the contribution of longitudinal forces in the equal stresses. Another effective way to change stiffness is to change the height of the wall of I-beam. In practice curvilinear shape of beams or shelves are not used because of complexity of manufacturing. They are replaced by the discrete form of cross section.

    Keywords: multispan beams, work method, optimization, uniform strength, welded I-beam, variable stiffness

  • Mathematic modeling of ring dynamic on two bearings with application of basic functions

    The  researches results of possibility of  equations simplification of ring dynamic, which is based on two bearings with the help of task of special base functions system, in accordance with conditions of  zero transmissions in bearings points are represented. The calculation of the coefficients of the basis functions of a linear function and the polynomial of degree  two and three.

    Keywords: ring based on two bearings, zero displacement at points bearings, system of basis functions

  • Induced brain activity during the perception of Kanizs figures

    The problems of visual perception whole object are considered in the paper. As an objective method to explore these issues, are used as incentives figure in subjective contours - Kanizs figures. The survey was attended by eight healthy men (SFU students and staff), right-handed, aged 22 to 35 years. The results of analysis of variance characteristics visual EP, recorded in the perception of different figures, showed that significant differences were found when comparing the real and illusory form with a figure control.

    Keywords: Visual perception, Kanizs figures, evoked potentials (EP), dispersion

  • Analysis of time series with cig fractal processing

    Briefly discussed the theoretical model of the spectrum of RR intervals and its changes depending on the processes taking place. Made a device for measuring cardiointervalogramms (CIG). Obtained from the renting of data, of varying duration and frequency shall be recorded for further processing. The analysis revealed that the resulting spectrum satisfies the conditions considered in the theoretical model, and can be further analyzed with fractal characteristics. Such an analysis is of great importance in the diagnosis of the patient directly to the duration of the therapeutic procedure for the optimization of both time and intensity exerted influence.

    Keywords: CIG; fractal series; the spectrum of RR intervals

  • Electrochemical titanium oxidation in electrolytes on the basis of glycerin with high water content

    The titanium dioxide synthesized by an electrochemical method is a perspective material for use in solar elements and catalysts of cleaning of water and air environments. Regularities of electrochemical synthesis of titanium dioxide in glycerin dilute solutions (1:1) in the presence of ammonium fluoride at 2-14 V are investigated. Mathematical scheduling of synthesis process according to plans of first order with use of the complete three-factorial experiment is carried out, the adequate regression equations for formation processes of a titanium dioxide in the field of potentials 8-14 V are received. The electron microscopy method proved porosity of synthesizable layers of titanium dioxide. Water content influence in electrolyte on the speed of electrochemical process and potential size influence on titanium dioxide materials yield is established. It is shown that under the chosen electrolysis conditions electrochemical process is accompanied by the considerable chemical disolution of a titanium. Electrochemical processes in water containing glycerin are investigated by a cyclic voltammetry method. It is established that at electrochemical oxidation of Ti in water containing glycerin (1:1) porous TiO2 with a materials yield no more than 25% is formed.

    Keywords: titanium, titanium dioxide, electrochemical oxidation, glycerin, ammonium fluoride, experiment scheduling

  • Principles of system modelling of functional systems of activation of reserve possibilities of the person

    In article the new model of interaction of functional systems of various hierarchical levels is offered: from unicell level, to level over social objects. Feature of model is introduction in its structure: perception filters, the accounting of a strong-willed component, convenience of its application not only in the field of physiology, but also in sociology, psychology, value logy and other sciences describing behavior of reasonable objects. The analysis of signals carrying out exchange of information between functional systems of different level of hierarchy is carried out. The offered model allows explaining and predicting many psycho physiological patterns accompanying conditions of expanded consciousness, and arising at activation of reserve possibilities of the person.

    Keywords: functional systems, super consciousness, activation of reserve possibilities

  • Prospects for the use of genre classification of Web documents in search engines

    The paper discusses possible options for the use of genre classification results of Web documents in search engines. The proposed methods can improve the quality of search engines.

    Keywords: Web document classification, text documents, search engines, search engine results page, search quality, diversity

  • Methods of determining the quality of a comprehensive assessment of complex technical systems in motor vehicles and material handling equipment

    The article describes one of the possible approaches to the investigation of a technique of definition of quality indicators of vehicles and lifting-transport machines, examines the concept - combining numerical estimate of single and complex indices into a single composite index.
    The following algorithms: the algorithm of finding the functional quality systems, represented by the linear form, with varying competence of experts, the algorithm modified method, allowing to make the transition from бифакторного distribution to мультифакторному, which is important when processing expert information; algorithm modified method, characterized by greater commonality and expanding the use of standard computer programmes at the decision of problems of estimation of quality systems on a computer.  

    Keywords: The level of quality of complex technical systems, decomposition methods of technical requirements, functional quality, modified method,algorithm

  • The system of automated construction of the social network graph

    To analyze social network graph effectively one needs a web-based tool, to parse network data automatically. In the first part of the paper we descibe a structre of the data we gain, including who comments whom information. Then we explain usage of Drupal CMF with Feeds module to parse network data and save it to database. The data obtained consist of name of the comment author, date posted, journal author, comment text, title of the comment. Prepared graph can be exported for further use.

    Keywords: social network graph, web-page parser, drupal cmf, feeds module, comments importer, comments graph

  • Method of screws installation into specified locations during osteosynthetic therapy of fractures of calcaneus fractures

      Depressed calcaneus fractures tend to reveal comminuted nature, and are accompanied by apparent  oedema of soft tissues in the ankle joint and foot zones. Rigidity of calcaneus fracture fixation and ability of an early performance of graduated weight bearing by a certain extremity depend on the precision grade of clamp location in the main splinter body. Presently, this problem is solved by means of an electric-optical image converter application. A method, and an appliance for its practical implementation are being offered, which will provide for an increased precision of a crew/wire installation into the calcaneus, with a simultaneous reduction of radiation exposure on both surgeon and patient. 35 patients with depressed calcaneus fracture were operated according to this method; a therapy result for the period from 6 months to 2.5 years has been made for 8 thereof. The algorithm of therapy did not foresee the external immobilization, the graduated weight bearing commenced after 1.5 months, and the complete weight bearing started after 2.5 months. Redislocation of splinters has not been noticed in any of the cases considered. The appliance offered ensures a high quality of surgical therapy. 

    Keywords: calcaneus fracture, osteosynthesis, cannulated screws, minimally invasive osteosynthesis

  • Problems of interaction between the port and road transport.

    The article is devoted to the turnover of the largest ports in Russia for the period from 2008 to 2012. The problems that arise in the interaction of road transport and ports, as well as their possible solutions are given  

    Keywords: The seaports of the Russian Federation, Freight transport, turnover, turnover growth problems, Interaction of road transport and ports.

  • The development strategy of the company in the context of the dynamics of its property

    The paper discusses options for building enterprise development strategies and formulation of strategic accounting of property on the basis of the strategies. Strategic Property records organized using tools accounting engineering, allowing to determine a reasonable estimate of the property on a date distributions and dynamics

    Keywords: strategic development, strategic account ownership, accounting tools engineering, dynamics of Ownership