The short review of existing panoramic systems are given. The limits of such systems doesn't allow to form a panoramic video with dealing the parallax effect in real-time systems. The presented algorithm for forming a panoramic video is free of these disadvantages. An algorithm based on mathematical model of the round-view system that takes into account the location of cameras, their intrinsic parameters and model of the world. The algorithm includes following chain of coordinate transformation: from panoramic image coordinates to spherical coordinates and to Cartesian world coordinate system, from world coordinates to camera coordinate system and to input image coordinates. Geometric distortion of camera is dealt. Model of the world is represented as spherical and a hemispherical surfaces.

Keywords: panoramic image, round-view video system, camera model, camera distortion, parallax

This article provides an account tsentrenno and eccentrically compressed reinforced concrete columns of high-strength concrete on the deformed pattern in SP 63.13330.2012. Compares the results of the calculation of the bearing capacity of the columns with the set experimental data. Proposed adjustments in the form of the coefficients in the formulas for the curvature tsentrenno compressed columns j and eccentrically compressed yb.

Keywords: high-strength concrete, physical experiment, prism strength, lateral reinforcement, concrete counters, deformation correction factor

Overview of technical means cooking rolled grain represented on the Russian market of agricultural machinery. The paper presents the design, specifications, advantages and disadvantages of technical equipment for feed preparation rolled grain-based foreign and domestic production are widely represented on the Russian market of agricultural machinery. Described conditioner grain original design developed in the Penza State Agricultural Academy.

Keywords: olled, rolls, mill, feeding, grain, feed, farm

The article describes the method of constructing acoustic microblower based on piezoelectric device. The article shows the main problems in cooling systems for microelectronics and describes the general construction, which allows you to bypass these disad

Keywords: microblower, micro-pump, piezoelectric device, airflow, acoustic

In article are considered improvement of the organization of labor protection in the construction, based on a position of system risk management are considered.

Keywords: The risk, injuring factors, labour safety, assessment of the state of labour protection in the organization, improvement of OSH

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

The composition, basic properties and application scope of the two main types of expanding binders historically most widespread in Russia such as gypsum-alumina expansive cement and expansive cement Type M are given. The expansion kinetics of the binders ranging from gypsum-alumina expansive cement to expansive cement Type M is observed. The role of lime as a supplement and as a hydration product of the Portland cement in the expansion process is shown: as a supplement in small values (2-4%) to gypsum-alumina expansive cement with higher gypsum concentration stabilizes the hardening and expansion process, in higher values boosts the expansion process to self-destruction. Optimization criteria of the expansion kinetics aimed at obtaining project expansion in 10 days of hardening without any additional chemical additives are proposed.

Keywords: gypsum-alumina expansive cement, expansive cement type M, expansion kinetics, lime

The issue of increasing the strength of cutoff and grooving tools is considered in the paper. The principle of strength balance of edge is offered to be used in designing the replaceable inserts. The calculations are made and the shape is designed for the strength balanced front surface of the cutting tools. The analysis of the received data is made and the regularities of the designed shape of the front surface of the cutting edge are established. Designs of replaceable cutting inserts made with a glance to structural characteristics and operating conditions of the cutoff and grooving tools are offered.

Keywords: strength, cutting end, strength balance, cutting end, cutoff tools

One of the main and most relevant and profitable areas of agricultural production - produce quality seeds in the farms, in the process of post-harvest grain processing. Was evaluated basic parameters of the separation process on the existing scheme sieve winnowing machine with certain technological characterization of the purified grain material according to the different conditions of separation, the possibility of defining a predetermined fraction of a feed and seed quality of purified material. Synthesis was performed variational various separation schemes and functioning to identify optimum operating parameters. According to the results of the experiment set technological possibility and the main characteristics of the process producing high-quality purified fraction of the material given by the scheme, which provides the best performance.

Keywords: grain material, fractionation, modeling, cleaning of grain

В данной статье приводятся примеры стандартных и не стандартных точек контакта с потенциальными клиентами, описаны механизмы их выявления, а также приведены примеры из практического опыта работы авторов по данной теме. Дано определение понятию «клиентоориентированнсть» с точки зрения клиента, и предложены варианты, где применима данная стратегия. Поднят вопрос о качестве обслуживания и что стоит за этим пониманием для клиента, чего он ждет от сферы услуг и на что рассчитывает. В статье рассмотрены этапы анализа точек контакта, приведены примеры влияния этих точек на формирование лояльного отношения клиента к качеству услуг. 

Keywords: услуга, точки контакт, идентификация, стратегия, анализ, клиент, потребитель, контакт, точки взаимодействия, ориентация на клиента

The nano-catalyst ceria (CeO2), activated by Pt nanoparticles, is known for being prospective and efficient material widely used in catalysis, fuel elements, and sensors. One of the most up-to-date methods of catalysts' reasearch is X-ray absorption spectroscopy (XAS) that is sensitive to the chemical state of catalyst's active centers [1,2]. Using XAS in the fluorescense detection mode at CeL1 line with high precision we studied electronic structure of Pt-activated nanoparticles of ceria at various redox conditions. In order to detect partial X-ray fluorescence yield the emission line CeLγ3 was used, which allowed us to increase spectral resolution. We researched local atomic and electronic structure of the materials under study. Oxygen vacansies were found to appear on the nanoparticles surface of ceria at 5% CO He atmosphere. Theoretical modeling of the obtained spectra at CeL1-edge demonstrated good agreement with experiment.

Keywords: X-ray absorption spectroscopy, HERFD, XAS, Ce-based catalysts, oxygen vacansies

Considered the organizational and technological systems in monolithic housing construction as the elements of the organization and management of the construction of production. Offered a choice of variability of the production apparatus , determine the most effective scheme of the system organization monolithic construction . It is recommended the formation of a number of consecutive and concurrent source OTSS interconnected unity of purpose , time and place of the action. Developed of activities that provide improved use of construction equipment.

Keywords: organization, technology, building systems, modeling, research, quality, communication, production, operation

A comprehensive analysis of the trend indicators moving averages (simple – MA, exponential – EMA moving average convergence-divergence – MACD). Used data from the site of Forex (FX) for the period from 21 July to 21 October, 2013. Computing scheme is implemented in the mode of conservative scalping trading system unveils new profitable intraday trading system for the forex market Forex.

Keywords: Trend indicators, moving Average, simple average, exponential Moving Average, moving average convergence-divergence, trend, short-term trend, period, a short period, long period, conservative scalping.

Only innovative activity is able to unite all aspects of science, equipment, economy, business and management. The current state of the innovative sphere of Russia speaks about serious contradictions in its functioning. Considerable scientific and technical capacity of the country was lost in the period of economic reforms. Now often it is impossible to predict precisely succession of events in economic life of the country generally and each organization separately. In modern conditions scientific and technical progress represents innovative development which is defined by the state as the most important priority of economic policy. Innovative potential of any managing subject needs to be estimated as difficult social and institutional system. To encourage managers and the production personnel competently developed motivational strategy is necessary to conduct work on search of innovations. Achievement of the put indicators of innovative development of the Rostov region and the country as a whole has to become result of an offered method of interaction of science, business and authorities.

Keywords: innovative activity, scientific and technical potential, economy, business, ideas, effect, development

"This article is devoted to the development of the method for modeling elements of microsystems technology(MST) of membrane type. In this paper perforated membranes are considered and the impact of perforation on the mechanical properties of the membranes is examined. In numerical simulations of the elements it is proposed to use the equivalent mechanical parameters of perforated membranes obtained at the initial stage of the simulation. This will allow to obtain find the optimal parameters of perforation, reduce the time and resource modeling of MST elements. To test the technique numerical experiments were conducted for the two square membranes with sides 1.5 and 3 mm fixed on the contour of the same thickness. We studied the influence of the size of the perforation on the equivalent Young's modulus of the perforated membrane. "

Keywords: microsystems technology, numerical modeling, perforated membrane