The process of electronic on-Board documentation composition is discussed. Mathematic description of the process of electronic on-Board documentation composition is introduced. Main tasks of electronic on-Board documentation composition is formed. The way of solution of these tasks is suggested. The objective of the research project is formed and relevancy of this research is noted.

Keywords: electronic on-Board documentation, tasks of electronic on-Board instructions composition, virtual simulators, operation plan, information field of documents, ontologies, mathematical models

This paper investigates the possibility of applying neural networks to problems of reverse calculation of multi-layered road structure. The paper considers networks with different architecture. To improve the conditions of convergence are applied the back-propagation procedure with automatic selection step, different types of activation functions with varying parameters.

Keywords: neural networks, inverse problems, polutorospalny predictor, the two-layer perceptron, the approximation of the activation function

In the article the general analysis identification of the problem for the law of the probability distribution of the observed random process (structural-parametric identification and comparative analysis of modern methods of identification of probability distributions showed, that at the present time to solve this problem is widespread method of normalized range (R/S analysis). Use this method when selecting a parametric model of the probability distribution best fits the experimental results, and minimal assumptions about the process under study and sufficient stability analysis of time series describing the investigated process. Information analysis method normalized range allowed us to propose a modified method for identification of the distribution law of random processes based on the normalized range (R/S analysis), for which the expressions for the elasticity and conditionality.

Keywords: diagnosis of technical systems, the method of normalized amplitude (RS analysis), method of Hirst, information analysis, the conditionality of the problem, the elasticity of the task

As part of the mathematical model of ship electrical loading unit with the equivalent power consumptions and compensating device connected to the non-ideal power source, the issue of identification of its parameters in order to reduce the duration of the voltage change in dynamic modes by generating capacitive reactive power in the load node.

Keywords: Voltage fluctuations, reactive power, mathematical model, voltage regulation, load node

The article considers the problem of constructing a fractal model magnetoplasma electrodynamic accelerator. Modeling such a complex system is defined as the process of computing a generalized solution of the Fokker–Planck–Kolmogorov equation, describing real physical processes in hereditary (hereditarity) systems. The obtained Markov model, which determines the navigation system on multifractal sets of States along the trajectory of dispersal in a magnetoplasma electrodynamic accelerator, according to the research, is determined by the fractal dimension and the mathematical apparatus of generalized fractional derivatives of Riemann-Liouville. We have investigated the solutions of this equation, obtained after synthesis for fractional derivatives of Riemann–Liouville. The transition to fractional order derivative in time allows to take into account the temporal and spatial effects of system memory, processes in which processes are classified as "residual" memory, part of which is preserved, and the other part corresponds to irreversible losses.

Keywords: magnetoplasma electrodynamic accelerator (ED), hereditary (hereditarity) model of the system, the equation of the Fokker–Planck–Kolmogorov, fractional derivatives of Riemann–Liouville

The article analyzes the state of urban air. It proved the impact of cement industry on air quality. The article also analyzed the technological process of cement production. As a result, built carrying circuit material flows. Carrying circuit material flows determined that dust is highly polluting air environment, because the dust is released at each stage of production. Analysis of the cement production process has allowed to identify the main objects that are involved in the process of air pollution, as well as to establish their relationship. The result is a physical model of the process of air pollution. Further, on the basis of a physical model of the process of pollution, it is possible to construct a physical model of the process of reduction of air pollution.

Keywords: the air of the city environment, the process of cement production, carrying circuit material flows, physical model, process air pollution, cement dust

The manuscript presents results of a study ferroelectric ceramic metaniobate lithium (PCR-61) which containing Li2O, Nb2O5 and CaO in the fallowing ratio, mass. % Li2O 10,03-10,10; Nb2O5 89,22-89,87; CaO 0,03-0,75. The most effective was the offset component in alcohol and air environments, which providing sufficiently high rate of sintering, the formation on their base high density ceramic with the most perfect crystal structure and microstructure of the equilibrium. Using the foregoing results the solid phase material was prepared by one-stage synthesis (SPS) for Tsint.1 = 820℃, τ = 5h. with followed by sintering by conventional ceramic technology (CCT) (without pressure) at a temperature Ts. = 1150℃, τ = 2h. After machining, the samples were polarized ("oil" polarization). The promising method SPS + CCT was presented. Material based on piezoelectric ceramics metaniobate lithium (PCR 61) was obtained by the SPS + CCT, close to the parameters of hot-pressed (HP) samples and can be used in electrical devices under the influence of ultra-high temperatures. The effectiveness of heterovalent modification as a method of directional changes in the properties of lithium metaniobate was shown.

Keywords: ferroelectric ceramics, metaniobates lithium, solid-phase synthesis, conventional ceramic technology, the electrical properties, high temperature technology

Zinc electrodeposits gained the distribution generally thanks to high protective properties. However it is possible to apply zinc electroplated coatings and at restoration of worn-out surfaces of details of cars. Thus zinc electrodeposits possess the high durability of coupling with a substrate that is pledge of long-term service of the details restored by zinc. Ensuring high durability of coupling of zinc electroplated coating with a basis possibly only at careful observance of technological process of preliminary preparation of a surface for sedimentation and directly the sedimentation. Some researchers suggest to estimate the received durability of coupling of a covering with a basis from the point of view of the theory of reliability. Technological reliability of process of preparation of details for galvanizing is meant as percent of the restored details, with a high durability of coupling. Process of preparation represents technical system in which operations act as elements. Reliability of technical system are defined by quantity and reliability of elements, their functional communication. And reliability of elements, is defined by technology factors and depends on quality of carrying out the previous operation. Refusal of any of elements causes refusal of all technical system. That is communication between elements of system consecutive and it is possible to apply the second theorem of probabilities according to which the probability of joint emergence of several dependent events is equal to work of probability of one of them on conditional probabilities of all others to it. It is necessary to understand change of reliability of an element in time as stability of reliability. For the purpose of improvement of technological process of galvanizing it is possible to perform operation of anode etching directly in galvanizing electrolyte. Thus the block diagram of preparation of a detail can be submitted as follows: machining; degreasing of surfaces of a detail Vienna lime; washing in cold water; anode etching galvanizing electrolyte; removal of products of etching from the covered surfaces and an exit to the mode; galvanizing.

Keywords: case detail, restoration, repair, defect, resource way of restoration, car repair production

The choice of the electrolyte for the galvanic deposition of coatings is one of the fundamental points to ensure high quality and reliability of the reconstruction of surfaces of machine parts. Zinc electroplated coatings currently used in the automotive and car repair production mainly as protective coatings. However, in addition to the protective properties of zinc galvanic coating has sufficient hardness and wear resistance, and damping characteristics. From the composition and type of the electrolyte depends on the quality of sediment, its continuity, physical and mechanical properties, adhesion to the substrate, and the performance of the deposition process, the service life of the electrolyte, and the frequency of service (filtering, correction, and so on), the mechanism of occurrence of electrolysis, types and rate of the electrochemical processes. When the metal plating of zinc are used mainly the following types of electrolytes: slightly acidic; acidic, coroborate, chloride, soleplate; alkaline, and mixed electrolytes. In use, in practice, the greatest use of acid, weakly acidic and alkaline. The optimal choice of the electrolyte galvanizing ambiguous, as the process of electrolysis depends on many factors and is characterized by more than twenty different indicators. The analysis showed that the main selection criteria are: quality of galvanic sludge - corrosion resistance, adhesion to the substrate, the distribution of sediment thickness, aromatherapist, flexibility, adaptability to soldering and decorative properties; technological parameters of deposition - the range of the cathodic and anodic current density, the productivity of the deposition, the temperature of the electrolyte, the velocity of the electrolyte, etc.; safety for humans and the environment; saving resources and costs; the stability of the electrolyte and ease of maintenance.

Keywords: passive film, adsorption, sedimentation productivity, electrocrystallization, mechanical activation, crystal lattice

Abstract: the Article is devoted to the problem of waste production during construction, operation and liquidation of coal mines of Russia. This work suggests that waste recycling technologies, including for reception of energy based on the modeling and system analysis of the biocenosis. The possibility of realization of innovative methods of processing plethodon using the biocenosis. Quite detailed questions transformation of industrial waste into energy through anaerobic bioconversion. As part of a description of the proposed methodology presents the results of field experiments and action program of recycling of materials at the stage of commercial operation. In particular it justifies the optimization of processing technology on the basis of the selection of the most active biocenosis of microorganisms. Theoretical developments are confirmed by practical data.

Keywords: disposal, technogenic resources, plothole, biotechnology, biotransformation, biocenosis, recycling

Carrying out anode etching of details directly in working electrolyte of galvanizing will allow to reduce significantly time for preliminary preparation of the restored surface for sedimentation and to increase stability of results on ensuring quality of a covering. Anode etching represents electrochemical processing during which there is a removal of oxidic films, dissolution defective superficial a metal layer, revealing its structure. Thus on an anode surface the slime consisting of etching products is formed and ions of bivalent iron get to electrolyte. At achievement of a certain (critical) value of density of anode current the process of passivating of a surface, that is a surface covering a passive film which is followed by sharp increase of tension and decrease in current begins. There is a rough allocation of the small vials of oxygen clearing slime from an anode surface. The mechanism of anode etching of surfaces of the restored details of cars in sulfate electrolyte of galvanizing is similar to etching in the electrolytes containing sulfate ions that is as a result of process of formation of an oxidic film and parallel electrochemical dissolution by its anions. Quality of electroplated coatings of the restored details of cars zinc is provided with anode etching on necessary depth before emergence of steady passivation and the subsequent covering of a surface a continuous passive film. The mechanism of passivation of a surface of the anode in the electrolytes containing sulfate ions can be described by two theoretical models: 1) passivation is caused by protection of a surface an oxide layer of metal; 2) passivation is caused by special nature of adsorption of ions of oxygen. At achievement of anode density of current of a certain (critical) value, and change of active dissolution of a surface by the steady passivation which is followed by formation of a monomolecular passive film happens an electrode of a certain value of potential.

Keywords: anode etching, passive film, current density, adsorption, passivating, potential

The implementation of electrochemical research is needed to identify the nature and magnitude of the impact of the main technological factors on the processes taking place during anodic etching of grey cast iron in the electrolyte on the basis of sulphate of zinc. The main technological factors that affect electrochemical processes occurring, is the temperature and acidity of the electrolyte, the concentration of the basic salt of zinc in the electrolyte and other components, the speed of flow of the electrolyte in the cathode space, the cathodic and anodic current density, rotation speed of the electrode, modes of mechanical activation. Electrochemical studies were carried out in three modes: potentiometric, potentiostatic and galvanostatic. Resulting in the obtained polarization curves for all three modes. To identify the degree of influence on the growth of the limiting cathode current density of mechanical activation of the cathode surface was carried out electrochemical studies, which were obtained cathode potentiometric curves. These studies took place with anode under similar research conditions in the same laboratory setting. The main difference cathodic electrochemical studies was that mechanical activation of the rotating electrode was carried out by introducing into the electrochemical cell of the lever, with a fixed abrasive material, pressing it against the surface of the test electrode. Thus, this electrode has already played the role of the cathode. Conducting electrochemical studies of the behavior of iron in sulfuric acid electrolyte galvanizing by etching, mechanical activation of the cathode surface and deposition of the electroplated layer, allowed us to obtain sufficient experimental data to identify rational modes of electrolysis at all stages.

Keywords: technological factor, electrochemical studies, polarization curves, electrochemical cell, electrode potentiostat

In this paper we attempt to quantitatively describe the process of diffusion of Nickel atoms to the copper substrate, taking into account the accelerated diffusion along the grain boundaries. A model experiment allows us to get guidance on the selection of the optimum thickness of the Nickel coating to ensure stable operation of wire with desired characteristics

Keywords: Nickel coating, the optimum thickness, copper wire, enhanced diffusion, diffusion coefficient, diffusion distribution of atoms, the grain boundary, modeling, task Fisher

The main mission of a cargo spacecraft is a cargo delivery on the ISS. The cargo positioning on the spacecraft board is realized on the Earth according to certain rules. The main limitations of the cargo positioning is the weight limitation, the volume limitation, the mass center limitation and the unloading sequence on the ISS. If the mass center deviation will be greater than a some default value, the replacement of cargo must be performed. It maybe more than one cargo replacement realized that leads to increase of complexity and duration of the spacecraft prepare procedure. So, the problem of aprioristic finding the cargo optimal placement on a cargo spacecraft board arises. The solution of this problem will make it possible to give some advice on the optimal cargo placement to the staff performing the spacecraft prepare procedure.

Keywords: cargo spacecraft, cargo placement, weight, volume, mass center, unloading sequence, optimal placement

In this article authors examine integrated method of ring cross-section concrete constructions diagnostics after the example of overhead contact system pylons. Complex physical-mechanical process of carcass and concrete working needs to take into consideration the state of these components. Authors suggest modern device of magnetic-particle method making for carcass state rating and its location in a pylon body. Concrete jacket defectoscopy may be done with modified device population of ultrasonic diagnostics. Examination zones of constructions are found depending on pylons workload scheme. The authors give correlations which let determine parameters of destructions (cracks) that lead to degradation of load-carrying capability. In the article there are graphic materials got as a result of ultrasonic inspection and mathematical expressions for estimating of residual load-carrying capability with a glance of carcass and concrete destructions.

Keywords: overhead contact system pylons, residual load-carrying capability, ultrasonic diagnostics, hodograph, cracks, carcass corrosion, technical state