the problems of moisture (cooling) in the mass-transfer apparatus at different parameters of fluid spray and varying the magnitude of the influence of the electric field in the zone of the spray.

Keywords: heat and mass transfer, mist dispersion, electroaerosol, electrostatic dissipation.

The article considers the design of modern electrically driven gas-pumping unit (EGPA). The advantages of a smooth adjustment of speed and performance EGPA. Provides an analysis of options for building the power part of the high-voltage frequency converters, used in the composition of the EGPA at compressor stations of main pipelines. Refer to the element base of high-voltage frequency converters. The characteristics of each of variants. The method of work of the frequency converters. Compare the characteristics of frequency converters of various manufacturers. The basic approaches to manufacturing. Defined the most optimal scheme of the power part of  frequency converters.

Keywords: frequency converter, topology, design, optimization, structural scheme

Block diagram of the active harmonic filter is considered.  State table inverter power switches active harmonic filter is considered. Calculated the capacitance on the DC link active harmonic filters. The calculation takes into account the power converter losses in the active harmonic filter.

Keywords: active harmonic filter, distortion power, energy storage capacitor

This paper shows the results of the experimental research the passage of the ultrasonic beam through modifiable layered structure in order to obtain data on changes in levels of pressure in the front slice of the acoustic field. This paper presents the spatial distribution characteristics of the acoustic field after passing the various layers in the liquid. Celebrated not only offset the propagation path, but also change the chart pressure in the front slice on the amplitude level , the width of the chart, the position of the lateral lobe and its amplitude.

Keywords: Ultrasound, layered medium, experimental assembly, refraction.

Today’s trend of electronics complicating makes developers to create more complex devices in a shorter time. Developers have to contrive different ways of designing automatization to prevent production worsening. However, automatization cannot improve the situation when an innovative device is developing because such developing involves a lot of testing and researches. In this article authors propose to use hardware in the loop simulation methods to optimize designing process. Hardware in the loop simulation is division the device in functional blocks, some of them are produced as models and other are produced as hardware. Usage of this method decrease cost of modernization hardware blocks and allow using a number of data processing algorithms at the same time.
The article contains a using of hardware in the loop actuality description, main steps of designing enunciation and description of method exemplified by designing of data-measuring and controlling system for automatic orientation of tropospheric communications station.

Keywords: hardware in the loop simulation; data-measuring and controlling system; design of electronic devices; development of electronic devices;

The paper describes the main methods of thermal testing of low-temperature solar systems, a comparative analysis of the complexity and duration of the experiments carried out by various methods; a method for remote monitoring.

Keywords: Low-temperature solar systems, solar panel, solar water heater, thermal tests, thermal performance, quasi-stationary method, method for remote monitoring.

The paper presents and analyzes the main methods of material stimulation of engineers and technician staff on russian and partly foreign enterprises, taking into account national management models. The article highlights the indicators that affect the stimulating part of remuneration for different occasions.

Keywords: engineering and technical personnel, remuneration, the stimulating part of remuneration, performance labor.

A stability problem of milling process is under consideration. A novel analytical tool is presented to assess the optimal cutting parameters which provide a chatter free machining. Chatter instability is broadly studied in the literature. However, the problem of simultaneous optimization of radial and axial depths of cut is kept out of scope. To describe the optimization method a single-degree-of-freedom model of milling process is investigated as well as corresponding equation of motion and function of cutting force. A unified delay-differential equation is proposed. A theorem of asymptotic stability is suggested. Suggested optimization technique allows to create a diagram of radial and axial depth-of-cut dependence.  As shown, there exists an extremum of function of axial and radial depth-of-cut dependence.  

Keywords: chatter, stability, delay-differential equation, oscilations, self-excited vibrations, optimization

In this work new circuit solutions of R-S-latch and D-trigger having nonvolatile electrically programmable memory and nonvolatile shift register are presented. It shows that nonvolatile R-S-latch can be effectively used as a memory cell and simultaneously as write and read circuits for it, thus it makes possible to increase reliability of read operation from EEPROM at the expense of differential read for every bit.

Keywords: CMOS, R-S-latch, D-tirgger, shift register, EEPROM, nonvolatile memory

Reviews the basic contents of diversification of thermal power plants, which will contribute to improve environmental and economic performance in the industry.

Keywords: diversification, enterprises of power industry, enrichment of coal, ash dumps, pollution, species blade, air pollution, ash, slag ash, secondary resources.

With the growing fleet's increasingly acute problem arises safety and reliability their exploitation as a result of this increase in productivity and accuracy of their technical diagnostics. Urgent task to further improve diagnosis for vehicles is to develop new methods and algorithms highlight the dominant component of the information in relation to a wide class of vehicles. The methods joint time-frequency and wavelet analysis. To isolate the dominant component of the information proposed to use the method of wavelet decomposition. Using vibro acoustic registration nodes vehicles funds allowed to receive signals carrying information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle. Using vibroacoustic registration of vehicles allowed nodes receive signals carry-ing information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle.

Keywords: vehicle, vibroacoustic diagnostics, dominant information, time-frequency analysis, wavelet analysis

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties

This paper presents a new neuroimmune-based method for block recognition of railway rolling stock inventory numbers. The advantage of such approach is  classification without using of negative samples. Developed technique combines segmentation and classification that allows to achieve higher noise robustness, segmentation possibility of fuzzy combined digits which have different fonts and typeface, and invariance of existing numbers to scale changes. Proposed method allows to constantly increase the training set for the improvement in classification accuracy by new committee classifiers statistics due to the data reduction property achieved by using the immune clustering mechanism. Research results were implemented in the software system of automatic recognition of cars numbers (ARNV), which is operated on the JSC Russian Railways.

Keywords: Method for letters block recognition, the committee neuroimmune classification model, identification, automatic recognition car number, duplicate number

In the article, the problem of reliability ensuring of bulldozers working at oil and gas objects bases backfill is considered. Typical failures are revealed. Statistical data on time between failures of bulldozers’ elements are obtained. Time between failures distribution regularities of running gear elements and engine are determined. Adequacy of logarithmic normal law of distribution and Weibull’s law is proved. Directions of the received results use are offered.

Keywords: Bulldozers, reliability, time between failures, distribution law, oil and gas objects

The properties of the water-soluble high-modulus silicate systems: based on alkali metal polysilicates called liquid glass and chain their transformation from lower to higher oligomers, with the subsequent formation of colloidal solutions - silica sol. The methods of preparation, properties and applications of water-soluble high-modulus silicate systems. The possibilities of their use as a binder and modifying agents for various nanostructured composite materials. The examples of promising areas of application of liquid glass and high modulus of aqueous solutions of silicates in construction and industry. In particular show the possibility of using liquid glass and aqueous solutions of silicates in the production of nanostructured silicate polymer. In space engineering for manufacturing water-destructed mandrels used in the manufacture of solid rocket motor casings and pressure vessels 'cocoon' of composite materials by winding. The application of the inorganic sol to obtain a nanocomposite ceramics and monolithic blocks of silicon oxide, which can be used in various fields of modern technology. The possibility of using silica sol as a binder for refractory ultra-lightweight shielding materials used to protect equipment from high impacts. The directions of development of the production of new acid-resistant materials and linings for protection of chemical equipment, parts and components operating in corrosive environments.

Keywords: Keywords: water glass, silicate polymer concrete, additives, silicates organic bases tetrafurfuriloksisilan, furfural alcohol, nanostructure composite materials, water-soluble silicates, silica sol, sol-gel transition, cured xerogel water-destructed mandr