In the process of exploitation of the building there is a reduction of its operational reliability in accordance with the inevitable influence of several groups of factors. The two main groups, influencing the technical condition of the buildings was considered

Keywords: operational reliability; technical condition; engineering diagnostics

To date, the main method of mass production of advanced functional materials for various purposes is the ceramic technology. In the manufacture of multi-component oxide compounds using of ceramic technology is difficult to achieve high uniformity of chemical composition. For activation of the raw ingredients and make it more uniform use of chemical-tions (co-precipitation of salts or hydroxides, spray drying, Cryochemistry) and physical-tions (mechano-chemical, microwave, ultrasonic) methods. The paper presents the results of work on obtaining Ni-Zn-ferrite 2000NN radiation-thermal sintering. The influence of base composition and alloying additions on the electromagnetic properties of the ferrites. Confirmed the effectiveness of the use of surface-active additives To increase the density of the raw pieces and level parameters. We propose a model that explain schaya efficiency of dopants in the radiation-thermal sintering.

Keywords: Nickel-zinc ferrite, radiation thermal sintering, base composition, alloying additives, permeability

"Dynamic mode of heat exchangers is typical for a number of technological thermal plants , as well as air-heating systems , ventilation, and air conditioning. Technologically predetermined control algorithm operating mode heat exchangers in practice implemented by means of manual or automatic adjustment in one or more control parameters . Obviously, the most efficient in the energy and technically and economically dynamic mode control algorithm of the heat exchanger can be detected only in the form of a review of the relevant mathematical model. In this paper we consider a mathematical model of the dynamic operation of the system of heat exchangers with natural air circulation . As input parameters are considered the temperature of hot and cold air streams. Modeled by changing the inputs are heat exchangers and the extent to which these changes will not affect the operation of the entire system. In order to keep the temperature at the i- MOT has not changed , the coefficient of variation should tend to zero , since all the other quantities are limited by technical parameters of the system . By changing the values ​​of the input parameters is analyzed mass flow of hot flow limits are changing the output parameters of the preceding heat exchangers that will not change the entire system ."

Keywords: heat loss into the environment, the starting temperature of the hot (cold) flow, the final temperature of the hot (cold) flow, the range of variation of hot, cold flow

Discusses various aspects of ensuring effective functioning of the enterprises of the fuel and energy complex. The substantiation of the composition of resources, groups of indicators to assess the efficiency of the fuel and energy complex enterprises. Justified types of resources, define technical and socio-economic development of the enterprise. The author proposes to the elements of production include indicators reflecting the quantitative and qualitative composition of the means of labor, subjects of work and technical equipment. Justified measures on the creation of an interconnected system of indices, which will analyze the changes in the industry with the purpose of planning and realization of actions aimed at sustainable development of the industry in the future.

Keywords: fuel and energy complex; resources; enterprise; sustainable development of the power industry; the effectiveness of the functioning of the fuel and energy complex

Promising absorbing materials along with a Ni-Zn-ferrites are Mg-Zn-ferrites, as they are also intensively absorbs electromagnetic waves in the frequency range from 50 MHz to 1000 MHz. The main advantage of the Mg-Zn-ferrite is used as an inexpensive raw material magnesium oxide. The paper presents the results of research to improve the efficiency of broadband radio-magnesium-zinc ferrite by increasing the contribution of the dielectric loss. The influence of alloying elements of the atmosphere gas and cooling after the sintering thermal radiation by absorption of electromagnetic waves. Confirmed cooling efficiency of products after sintering in an atmosphere with reduced oxygen partial pressure to increase the dielectric constant. A model is proposed to explain the increase in the dielectric loss ferrite during cooling in a reducing atmosphere.

Keywords: radioabsorbing ferrites, microstructure grain boundaries radio measurement radiation thermal sintering

The article contains the approaches of  improving the reliability and environmental safety of cleaning waste water treatment plants in the industrial environment, with the help of the express - control methods (oxidation - reduction potential respirometry) and modern technology (biologics, intraband circulation biomass)

Keywords: safety, environmental safety, sewage treatment, waste water, oxidation - reduction potential, respirometry, biologics, intraband circulation biomass

Overview of technical means cooking rolled grain represented on the Russian market of agricultural machinery. The paper presents the design, specifications, advantages and disadvantages of technical equipment for feed preparation rolled grain-based foreign and domestic production are widely represented on the Russian market of agricultural machinery. Described conditioner grain original design developed in the Penza State Agricultural Academy.

Keywords: olled, rolls, mill, feeding, grain, feed, farm

The article describes the method of constructing acoustic microblower based on piezoelectric device. The article shows the main problems in cooling systems for microelectronics and describes the general construction, which allows you to bypass these disad

Keywords: microblower, micro-pump, piezoelectric device, airflow, acoustic

In article the direct connection of a condition of soils and quality of a formed superficial diffusion drain is considered. For minimization of pollution of a superficial drain and ground waters when unloading them in a reservoir it is offered to use coal mining waste as a sorbent of organic and inorganic pollution. Thus, the area of utilization of dump breeds of coal mines for nature protection and soil-improving actions extends.

Keywords: Dump breeds of coal mines; sorbent; minimization of pollution of a superficial drain; the urbanized territories; anthropogenous impact on the soil

The article deals with the design of experiments for dispersed particles capturing in elektrocyclone. The autors gives planning matrix calculation, the regression equation based on the aerosol velocity and the initial concentration of the aerosol and plot of function.

Keywords: gas cleaning; cyclone; elektrocyclon; fly ash

"Application of solar energy in supplying various infrastructure units is urgent these days. Traditionally these were the centralized urban heating systems, which were used for heating buildings. The suggested heating system is composed of solar collectors with a total area of 44.16 m2 and with a volume flow of hot water to the consumer of 1.5 m3/h. Computer-aided heating circuit consists of traditional circuits, composed of solar collectors, circulation pump and a lamellar heat exchanger. Additionally, the scheme is extended by a fixed temperature water tank and a circuit, which interfaces the heating systems. They will be in their turn separated by a heat exchanger. The equipment also provides an opportunity of organizing a reverse pairing with the heating systems to return the excess heat into the network. This scheme has several modes of operation. In the conditions of nighttime, cloudy afternoon, light fog or smog water heating is provided by a central source. If during daytime, while being heated directly by the sun the water gets overheated the overheated water discharge mode is switched on automatically to discharge excess heat to a central heating system. The scheme provides for a “solar connectors and central source of heat parallel operation mode” to maintain the desired temperature, for example in the morning. According to the results of observations the share of water heating due to the solar collectors in summer is on average about 75%. Shared usage of central source of heat and solar collectors allows to efficiently use the available energy resources."

Keywords: renewable energy sources; solar collectors; computer-aided heating circuit; reverse pairing with the heating systems; efficient using of the available energy resources

In article are considered improvement of the organization of labor protection in the construction, based on a position of system risk management are considered.

Keywords: The risk, injuring factors, labour safety, assessment of the state of labour protection in the organization, improvement of OSH

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

The issue of increasing the strength of cutoff and grooving tools is considered in the paper. The principle of strength balance of edge is offered to be used in designing the replaceable inserts. The calculations are made and the shape is designed for the strength balanced front surface of the cutting tools. The analysis of the received data is made and the regularities of the designed shape of the front surface of the cutting edge are established. Designs of replaceable cutting inserts made with a glance to structural characteristics and operating conditions of the cutoff and grooving tools are offered.

Keywords: strength, cutting end, strength balance, cutting end, cutoff tools

Analysis of the effectiveness of the electrophysical activation of foam concrete mixtures was completed. The raw materials and experimental technique are described. Results of estimation of the effectiveness and impact of alternating electric field on the foam concrete mixes was presented. As object of research was made the impact of factors such as the grading of the aggregate and the tension created by the electric field on the physico-mechanical properties of foam concrete made of electroactivated mixtures. Conclusions are made on the basis of the obtained experimental dependencies.

Keywords: Variable electric field, foam-concrete mix, activation, grain size of sand, coefficient of structural quality, gelation, interpore partition