The article considers the solution of the urgent problem of calculating the size of the effective focal spot of a microfocus X-ray tube using computer modeling methods. The principle of operation of the calculation method used by the authors is to compare interference images obtained using tested microfocus X-ray tubes with simulated interference patterns formed using the developed software by numerically solving the wave equation. It should be noted that modeling a one-dimensional interference pattern using fast Fourier transform requires a significant amount of RAM and takes considerable time even when using modern computer equipment. The paper presents the results of modeling phase contrast profiles for two types of test objects – nylon fishing line and aluminum wire. The considered method for determining the size of the focal spot is characterized by good sensitivity and allows efficient and high-precision calculations for all types of microfocus X-ray tubes.

Keywords: computer modeling, X-ray tube, microfocus source, focal spot, non-destructive testing

The article analyzes modern approaches and technologies for recycling and recycling of building materials. Such types of waste as reinforced concrete, brick, glass, wood, plastic, etc. are considered. Special attention is paid to innovative methods of processing to obtain secondary raw materials (recycling). It is shown that the most promising technologies are the crushing of concrete, brick and reinforced concrete for reuse in construction, the melting of scrap metal, glass and plastic, the processing of wood waste into slabs and fuel. There is an insufficient level of application of innovative solutions in Russia. A set of measures has been proposed to improve the efficiency of construction waste disposal: the introduction of advanced technologies, the construction of waste recycling plants, the adoption of a targeted state program, and the improvement of environmental culture.

Keywords: waste, construction debris, Russia, secondary raw materials, reuse, environment, recycling, burial, recycling

The article contains the methodology and results of theoretical and experimental studies of the stress-strain state of a conical radial-beam dome with triangular shell elements. The results obtained by various methods are analyzed and compared. The triangular membrane panel is part of the radial beam dome structure and consists of a support frame and a steel membrane in the shape of a triangle. The shape of the triangle forming the membrane panel can be different and depends on the number of ribs in the radial beam dome. The supporting contour is a compressed-bending element of the dome and is made, as a rule, from a rolled steel profile with a channel section. The membrane is made of thin steel sheet and attached to the upper flange of the channel with self-tapping screws or spot welding. To assess the strength and deformability of a steel membrane sheet, its operation under the action of a uniformly distributed snow load, an unevenly distributed snow load and a concentrated installation load was considered. Several options for nonlinear static calculations in various computer systems are shown.

Keywords: building structures, wooden structures, membrane panel, stress-strain state, radial beam dome, dome, membrane, design, experimental study

Bar structures are widespread in construction due to their economy, freedom of design shapes and sizes. As a result, automation of design and calculation of such structures is an urgent task. As part of the study, the task of developing a software module that generates a map of optimal cutting of rolled metal based on the results of calculations of rod structures has been implemented. The algorithm under consideration takes into account such features of the cutting optimization problem as taking into account the width of the blade, the possibility of using half the size of the rolled product, support for optimization of several sections, and welding of parts in case the length of the workpiece is exceeded. The software module is developed using JavaScript and C# languages. The ability to automatically generate cutting maps based on the results of optimization of rod structures increases the efficiency of designing building structures.

Keywords: Design in construction, bar structure, computing system, web development, design in construction, rod structure, computer system, web development, optimal cutting, rolled metal, cutting map

The article is devoted to the use of reinforced soils in the base of pavements of highways located in the I road-climatic zone. The features of the operating modes of reinforced foundation soils are considered, and their physical and mechanical characteristics with various combinations of mineral and polymer modifiers are determined. The authors analyze the advantages and disadvantages of using reinforced soils. The article also discusses the design and construction of roads using reinforced soils.

Keywords: highway, road pavement, foundation, soils, reinforced soils, modifiers

The article discusses standard models of titanium dioxide-based memristors. A memristor is similar to a memory resistor and demonstrates a nonlinear resistance characteristic in which the charge parameter is a state variable. They can be used to create new types of electronic devices with high energy efficiency and performance, as well as to create machines that can learn and adapt to changing environmental conditions and in many practical applications: data storage memory (binary and multilevel), switches in logical electronic circuits, plastic components in neuromorphic artificial systems intelligence based on nanoelectronic components. It has been shown that when voltage is applied to charged ions, they begin to drift, and the boundary between the two regions shifts. When a sinusoidal alternating voltage of a given frequency is applied to the memristor, the shape of the volt-ampere characteristic (VAC) resembles a Lissajous diagram centered at the origin.

Keywords: memristor, model, voltage characteristic, nonlinearity

The article shows the importance of the role of clinical engineering departments in ensuring high-quality comprehensive control of the state of medical equipment at all stages of its life cycle. The main resource of such departments is the resource of working time of clinical engineers. In order to rationalize the use of this resource, we analyzed data on the time budget for the maintenance of 2459 units of medical equipment in medical institutions of Volgograd. The results of the analysis allowed us to identify 3 subgroups of medical equipment in the general data array that have statistically significant differences in the time characteristics of their maintenance and require a different approach to managing the time of clinical engineers servicing them. At the final stage of this study, ABC-XYZ analysis was used. Its results allowed us to formulate recommendations for rationalizing the use of working time of clinical engineers to work with the subgroups of medical equipment identified in this study in practical conditions.

Keywords: clinical engineering, clinical engineer, time budget, maintenance of medical equipment

Technology of jet-grouting is a method of strengthening weak or heavily watered soils by pumping high-pressure cement slurry into the well to break the structure of the soil and simultaneously stirring its particles with cement slurry. The result is a ground-cement mass which has predefined improved strength and deformation characteristics. Technology of jet-grouting has a great potential for development and application in various construction industries, such as buildings, roads, bridges and other structures under various geological conditions. The development of jet-grouting technology won't only expand its application, but can improve competitiveness in the construction services market.

Keywords: recycling, reinforced concrete, secondary crushed stone, construction waste, crushing equipment.

The article discusses the use of organic binders to modify the properties of cement soils. The scope of application of cement soils in construction practice, including the construction of highways, is considered. The influence of the use of organic binders as a complex additive that modifies the strength characteristics of cement soils has been studied. The influence of the use of complex modifiers and additives on the frost resistance and water permeability of cement soils has been determined.

Keywords: cement soil, organic binder, highway, working layer, frost resistance, modifiers

The article deals with the peculiarities of the results of tests carried out to determine the characteristics of the contact zone organized by stamping on a steel plate. During the test, the specimen was in the steel mold in which it was manufactured. The steel form was used to prohibit horizontal movement of the steel thin plates and minimize the effect of uneven slippage of the steel gouge in the direction perpendicular to the shear force. The considered tests were carried out according to a specially developed methodology, which took into account the specifics of the contact zone shear operation, the applied tooling and took into account the set objectives of the study.

Keywords: contact zone, contact characteristics, test methodology, shear tests, stamping, composite design

In the context of rapid urbanization of society, modeling the processes of sustainable urban development has attracted considerable attention from scientists. This paper presents a study of fuzzy cognitive maps (FCMs) as an interdisciplinary model for simulating urban development processes. This highlights the versatility of FCM in integrating expertise and quantifying the impact of indicators that shape urban space, from infrastructure and housing to environmental sustainability and community well-being. The study uses a synthesis of an extensive literature review and expert opinions to create and refine a cognitive map tailored for municipal development. The methodology outlined formulates a systematic approach to selecting concepts, assigning weights, and validating the model. Through collaboration with cross-disciplinary experts, the study confirms the value of FCM for identifying cascading effects in the decision-making process when shaping urban development strategies. Recognizing the limitations of expert methods and the fuzzy nature of data, the article argues for the effectiveness of FCM in not only identifying but also addressing emerging urbanization problems. Ultimately, this article contributes a nuanced perspective to strategic planning discourse by advocating for the use of NCC as a management decision support tool that can assist policymakers in achieving a sustainable and equitable urban future.

Keywords: fuzzy cognitive maps, urban development, urban planning, sustainable urbanization, expert systems, social well-being

Stepper motors are often used in automated laser cutting systems. The control circuit of a stepper motor requires a special electronic device - a driver, which receives logical signals as input and changes the current in the motor windings to provide motion parameters. This research study evaluated stepper motor drivers to determine the feasibility of their use - PLDS880, OSM-42RA, OSM-88RA. To control the system, software code was written, which was connected to the controller via a link board. With each driver, in different modes, optimal parameters were selected (initial speed, final speed and acceleration), that is, the movement of the carriage without stalling for ten passes with a minimum travel time. The results of the experiments are presented in the form of tables.

Keywords: laser, laser cutting, automation, technological process, stepper motor, performance, driver, controller, control circuit, optimal parameters

In this paper, we reviewed and analyzed various time series forecasting models using data collected from IoT mobile devices. The main attention is paid to models describing the behavior of traffic in telecommunication systems. Forecasting methods such as exponential smoothing, linear regression, autoregressive integrated moving average (ARIMA), and N-BEATS, which uses fully connected neural network layers to forecast univariate time series, are covered. The article briefly describes the features of each model, examines the process of their training, and conducts a comparative analysis of the quality of training. Based on data analysis, it was noted that for the UDP protocol, the ARIMA model has the best learning quality, for the TCP protocol - linear regression, and for the HTTPS protocol - ARIMA.

Keywords: telecommunication systems, traffic analysis, forecasting models, QoS, artificial intelligence, linear regression, ARIMA, Theta, N-BEATS

The possibility of architectural and spatial organization of a series of urban interiors located along the route of communication between buildings and faculties of university complexes of an “integrated” and “distributed” type is being considered. Requirements for such transit spaces are being formed. Options for a scenario for organizing such spaces are proposed, which is an algorithm for the spatial formation of successive functional zones and the student’s consciousness throughout the process of movement and learning. “Architectural-environmental modules” are proposed as a structural unit, including various equipment options and small architectural forms - as a means of organizing spatial scenarios. A typology of similar modules has been developed for various transit zones and types of urban spaces. This approach allows us to form and support the brand of the university as a unified communication space.

Keywords: university complex, transit urban spaces, scenario approach, functional-thematic zones, architectural and environmental modules.

Water saturation of soils in the area of foundations is accompanied by a deterioration in their bearing capacity and is often detected only with the appearance of the first signs of deformation. Effective monitoring of soil conditions helps reduce escalating damage. For this purpose, a variant of dynamic penetration was developed and applied, which made it possible to establish a fivefold reduction in the resistance of soils to indenter penetration in the water-saturated zone in comparison with their natural state. The approach provides rapid mapping of the state of the soil mass in areas of expected soaking, for example, in the area of backfilling of foundations. The results are applicable for monitoring soil soaking in technogenic conditions and are of interest to a wide range of specialists in the field of construction.

Keywords: flooding, dynamic penetration, monitoring, mapping, water-saturated soil