This article considers the causes of halitosis and methods of the diagnosis. Halitosis, syndrome of bad breath caused by pathological condition of the oral cavity or internal organs and systems, has a significant impact on the patient's social life. Analysis of the composition of exhaled air may become a promising way to diagnose halitosis, as the direct relationship between the compositions of molecules of oxygen, carbon dioxide, nitrogen oxides, ammonia etc. and the causes of halitosis were found. The article's authors review and analysis the methods of measurement of qualitative and quantitative composition of exhaled air. The most common methods include the use of electrochemical, optical sensors, infrared spectrometers and mass spectrometers. The latter method is positioned as the most optimal method of analysis of exhaled air due to its high accuracy, selectivity and sensitivity. The authors' portable mass spectrometer being developed is represented. At this stage it can detect traces of oxygen and carbon dioxide, which inject into the device through the capillary system or membrane one, in gas samples in real-time mode.

Keywords: diagnosis of halitosis, molecular biomarkers, analysis of exhaled air, portable mass spectrometer

Results of comparing the beamwidth and the concentration factor of receiving antenna wich were calculated using the metods of Bartlett and Prony when working on the background noise of the sea are considered. It was shown that efficiency parameter estimation signal sources using Prony methods is higher than when using the method of Bartlett.

Keywords: Prony algorithm, vector-scalar array,dynamc sea noise, the covariance, the flow of power

Possibility of receiving lungs self compacting concrete is considered. The technique of a choice of components of a raw mix is offered and are brought physics - mechanical characteristics of a ready construction materia  

Keywords: Self-compacting concrete, the supersoftener, knitting, filler.

A mathematical model of heat transfer processes, the discrete model is based on the finite difference method, and the results of calculations of the temperature distribution also will be developed. In addition the program was created which allows to calculate the distribution of temperature over its entire length for given values ​​of insolation, ambient air temperature and air velocity inside the collector  

Keywords: mathematical modeling, finite difference method, heat transfer processes, solar collector

 An analysis of new methods and means for a mesurement of parameters of piezoelectric ceramic elements and materials is carried out. These methods and means are based on a digital principle of the construction of devices. An impuls with a linear frequncy modulation therein is used as an signal for exciting. Results of experimental studies on this subject are represented for discussion.     

Keywords: piezo ceramic element, piezo, methods and means of measurement, digital signal processing

We consider the problem of the use of adaptive autonomous scripts in the decision of problems of management of information resources of computer systems. Developed a conceptual model of adaptive autonomous script with use of frames and apparatus of finite automata, which expands the possibilities of automation of complex problems of information resources management  

Keywords: adaptive autonomous scripts, theory of finite automata, frame, slot, management of distributed information resources.

Advantages of being self-сщьзсештп concrete of the lowered density (LSUB) before heavy and light concrete are shined, characteristics of components ЛСУБа and influence of their quantitative contents are provided in a mix on properties of the fresh and hardened concrete. The optimum mode of warmly moist processing is offered.

Keywords: Self-compacting concrete, the supersoftener, knitting, filler, a volcanic tufa.

A scheme of the experimental setup of the jet air temperature measurement. Experimental results confirm the dependence of the frequency stabilnost pneumatic signal from the flow temperature with a large number of measurements.

Keywords: pneumatics, temperature, piezo, airflow, sensor stuyny

With the increase in the coefficient of friction is a growth of the torque transmitted by the lead pair of friction of the main friction, reducing torque is transmitted by the slave pairs of friction friction core group and a couple of extra friction of the friction. Load transfer in the adaptive friction clutches reduces spacer force and accelerate the growth of the torque transmitted by the friction pair of the main driving frictional group.

Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

The coefficient of friction, whereby the total nominal load adaptive clutch transmitted only the leading pair of friction friction basic group is less than the maximum value, which may take the coefficient of friction in actual operation of the coupling. Appearance and an increase in the strength of the spacer when the external load and increasing at an elevated value of the friction coefficient begins at a certain minimum value of the external load, which depends on the total number of pairs of friction of the friction core and the gain. The dependences of the distributions of the torque between the lead pair of friction friction main group and driven friction pairs of basic friction and friction pair of extra friction.  

Keywords: the coefficient gain, a separate positive connection, the coefficient of friction, clutch, friction pair

To solve the problem of choosing an algorithm of optimal allocation of resources to development of the energy producing industry, initially held the formalization of this task and the required payment ratio. The relationship led to the conclusion of one of the most effective methods for finding optimal solutions-dynamic programming method  

Keywords: algorithm, еnergootrasl, distribution, development, function, script charts, dynamic programming

The proposed method of designing hardware components optical switching systems simplifies prototyping and development of systems of optical switching and multi-core VLSI. This method allows to automatically set parameters of the optical system at the design stage, depending on the requirements. This method may be cost-effective at the stage of technical specifications of the project, as will reduce the time required for its coordination between the customer and the design engineer.
At the heart of developing a method of designing systems, optical switching elements is a comprehensive analysis of the equations and functions describing the electrical and optical properties of laser heterostructures, as well as electro-optic modulators and Fabry-Perrot resonators. Fundamental static and dynamic characteristics of semiconductor diode lasers can be calculated by using a set of kinetic equations describing the interaction of electrons, holes and photons in the active layer of the laser structure. At various stages of this method is processing, evaluation and calculation of the main characteristics of the elements of integrated optical switching systems.  

Keywords: optical switching, integrated injection laser, quantum-scale heterostructure, amplitude modulation, terahertz range

Computer-aided diagnostic system of semiconductor structures for the tested structures volt-ampere and voltage-capacitance characteristics measuring at different temperatures in wide ranging bias voltage was made in this work. Computer-aided diagnostic system of semiconductor structures allows to define parameters of deep-lying levels, profiles of alloying impurities distribution, charge carriers life span, surface states energy spectrum density with high reliability and efficiency and can be used for processing and optimization of technological modes for solid-state electronics structures generation.

Keywords: diagnostics, dynamic spectroscopy of deep-lying levels , spectrum, deep-lying levels, surface states, profile of impurity distribution

The article analyses the processes of social life technologization, their role in the development of contemporary society and mankind as a whole. The main trends in the development of social technologies are described in the article. Special attention is given to the scientific approach, the use of scientific methods in the technologization of social actions, the modeling of social processes and technification of social work. The article is of a research nature because it identifies the main problems of a research subject associated with various aspects of social technologies and their potential application in social life. It explores the use of both universal and specific social technologies; explores their phasing and sequencing. The article proves the impact of knowledge of theoretical aspects of social technologies on research in sociology and social philosophy, as well as the practical application of social technologies, allowing one to use their research capacity in social practice.

Keywords: social technologies, technologization of social life, modeling of social processes, sequencing, phases of social technologies, universal social technologies, specific social technologies

In this work we have investigated the structure of individual single-walled and multi-walled carbon nanotubes by high-resolution electron microscopy and electron diffraction. To grow carbon nanotubes we used a catalytic chemical vapor deposition method. It was shown, that this synthesis protocol gave in general single-walled and double-walled carbon nanotubes with a high level of crystallinity. The diameters of the nanotubes were in the range 1.5 - 7 nm. We also observed that there was a certain level of amorphous carbon deposited on the nanotube surface during the growth. In this work we also present the structure analysis of the double-walled carbon nanotube by means of electron diffraction. We show that the structural date derived from electron microscopy and electron diffraction agree within the experimental error.

Keywords: Carbon nanotubes, electron diffraction, electron microscopy