Considered feature design of pump and presents the results of a study of Assembly parts: pump shaft, cotters, impellers. Research of include: measurement of runout of the shaft and the shaft with working wheels, on the basis of measurements was concluded. 

Keywords: Assembly, shaft, wheel, analysis, heartbeat, gap.

Design of the protective hermetic shell of the reactor compartment of the nuclear power plant discusses in the article. The possible deformation of elements of the hermetic shell during preliminary tension  and testing is considered

Keywords: protective hermetic shell; change of form; deformation; strength tests

The paper describes the method for determining the position of the contact wire of electrified railways using microwaves. The method is based on the triangulation system of two georadars and allows to determine a contact wire zigzag and height from the rail head. The proposed method is all-weather with the possibility of continuous monitoring of the overhead contact wire in plan and profile with the opportunity to automate the processing and signaling abnormalities.

Keywords: railroad contact line, contact wire location, GPR, automatic control systems

By self-propagating high-temperature synthesis (SHTS) prepared fine powder оf La2-xSrxNiO4 composition , which is used to obtain dense ceramics exhibiting the properties of n-type semiconductor. Prolonged annealing of the samples resulted in a decrease of the conductivity on the order of 3-4, and the changing nature of the dielectric spectrum: dielectric constant ε' has a stable value of 4·104 Hz in the range of 0,4 − 1·105 Hz .

Keywords: dielectric constant, phase separation, nikelate of strontium lanthanum, self-extending high-temperature synthesis

A model is presented for the calculation of thermoelastic stress and displacement  in semiconductor structures
due to laser processing. Developed software based on the model allows to determine the optimal parameters of laser processing with taking into account the physical and topological parameters of the structure. The model is divided into two tasks: the non-stationary heat  conduction equation is solved, and the equilibrium equations and Hooke's law. For equations solution was used the finite difference method.

Keywords: Laser processing, thermal stress, finite difference method

This paper presents mathematic model of optimization of expenses of stock-piling of timber and logging timber from felling areas to timber consumers by transport networks. This model optimize technological processes which appears during the process of stock-piling of timber and logging timber. 

Keywords: log truck, rail transportation in timber processing complex.

The aim of this work was to conduct monitoring and make a regression model of the microbiological air pollution in Volgograd near highways. The work carried out monitoring of microbial air pollution in the residential district of Volgograd near two major highways - first and second longitudinal lines. On the first phase of research the microbial monitoring of air pollution in the residential district of Volgograd was conducted, depending on the proximity to the highway. Number of microbial cells (MC) was evaluated by sedimentation. The assumption is made about the nature of the regression relationship between microbial air pollution and the distance from the highway. Approximating functions and regression coefficients are constructed for the first portion of the longitudinal line at different levels of traffic road. Function is obtained, which allows to calculate the value of microbial contamination of the air, depending on the distance to the road and number of vehicles. In the case of high levels of the microbiological monitoring of the basin air it’s necessary to carry out measures to reduce microbial contamination of the air, for example, regular watering roads, tree planting, vegetative barriers adsorbing pollutants, chemical treatment of disinfectants. The calculation of microbial contamination of the air near a residential building located at a distance of 10 meters from the highway in the central region of Volgograd is conducted using proposed in function prediction of microbial contamination. The developed technique allows us to make calculations without setting up experiments in a specialized microbiology laboratory.

Keywords: monitoring , microbial contamination of air , the regression model , mathematical modeling

Calculation of coefficient of operating conditions of the pipeline is presented in article for the West Siberian region. Dependence of service life of the pipeline on this coefficient is presented. The data of samples witnesses received in laboratory of nondestructive control, confirming relevance of this subject are provided.

Keywords: corrosion, wall thickness, standard service life, pipeline, coefficient of working conditions, diameter, pressure, settlement resistance.

Consider the choice of coating anodes for electrolysis of sodium hypochlorite nizkokontsentrovannogo 3% solution of sodium salt of food and water of the Black Sea. Defined corrosion resistance of anodes with different laying oxides of ruthenium and iridium and their characteristics: yield chlorine-current voltage on the cell growth dynamics of the concentration of active chlorine in the solution.

Keywords: oxide coatings, iridium, ruthenium, low concentration of sodium hypochlorite, the corrosion resistance of anodes according to the output current of chlorine, the electrolysis of a 3% solution of sodium edible salt and sea water.

The paper presents and analyzes the main methods of material stimulation of engineers and technician staff on russian and partly foreign enterprises, taking into account national management models. The article highlights the indicators that affect the stimulating part of remuneration for different occasions.

Keywords: engineering and technical personnel, remuneration, the stimulating part of remuneration, performance labor.

A stability problem of milling process is under consideration. A novel analytical tool is presented to assess the optimal cutting parameters which provide a chatter free machining. Chatter instability is broadly studied in the literature. However, the problem of simultaneous optimization of radial and axial depths of cut is kept out of scope. To describe the optimization method a single-degree-of-freedom model of milling process is investigated as well as corresponding equation of motion and function of cutting force. A unified delay-differential equation is proposed. A theorem of asymptotic stability is suggested. Suggested optimization technique allows to create a diagram of radial and axial depth-of-cut dependence.  As shown, there exists an extremum of function of axial and radial depth-of-cut dependence.  

Keywords: chatter, stability, delay-differential equation, oscilations, self-excited vibrations, optimization

In this work new circuit solutions of R-S-latch and D-trigger having nonvolatile electrically programmable memory and nonvolatile shift register are presented. It shows that nonvolatile R-S-latch can be effectively used as a memory cell and simultaneously as write and read circuits for it, thus it makes possible to increase reliability of read operation from EEPROM at the expense of differential read for every bit.

Keywords: CMOS, R-S-latch, D-tirgger, shift register, EEPROM, nonvolatile memory

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties

This paper presents a new neuroimmune-based method for block recognition of railway rolling stock inventory numbers. The advantage of such approach is  classification without using of negative samples. Developed technique combines segmentation and classification that allows to achieve higher noise robustness, segmentation possibility of fuzzy combined digits which have different fonts and typeface, and invariance of existing numbers to scale changes. Proposed method allows to constantly increase the training set for the improvement in classification accuracy by new committee classifiers statistics due to the data reduction property achieved by using the immune clustering mechanism. Research results were implemented in the software system of automatic recognition of cars numbers (ARNV), which is operated on the JSC Russian Railways.

Keywords: Method for letters block recognition, the committee neuroimmune classification model, identification, automatic recognition car number, duplicate number

Problem research of display the orthogonal projection of four dimensional hypersurface defined by the equation in an implicit form one and two hyperplane. To communicate and bypass hypersurface Discriminants assumes that the hypersurface of the two-parameter family of two-dimensional display received surfaces in five-dimensional space. The analysis of kriminant four dimensional hypersurface orthogonal projection onto the coordinate hyperplane in two coordinate axes. The intersection of three dimensional hypersurfaces axiom (kriminant) defines a two-dimensional surface that is the envelope of the two-parameter family of two-dimensional surfaces. Are the necessary and sufficient conditions of existence of this envelope.
The results obtained are used to study the Discriminants four-dimensional hypersurface, the display of two-parameter family of spheres in a five-dimensional space.  

Keywords: a family of surfaces, hypersurface, envelope, the display features, а discriminant.