The paper presents and analyzes the main methods of material stimulation of engineers and technician staff on russian and partly foreign enterprises, taking into account national management models. The article highlights the indicators that affect the stimulating part of remuneration for different occasions.

Keywords: engineering and technical personnel, remuneration, the stimulating part of remuneration, performance labor.

With the growing fleet's increasingly acute problem arises safety and reliability their exploitation as a result of this increase in productivity and accuracy of their technical diagnostics. Urgent task to further improve diagnosis for vehicles is to develop new methods and algorithms highlight the dominant component of the information in relation to a wide class of vehicles. The methods joint time-frequency and wavelet analysis. To isolate the dominant component of the information proposed to use the method of wavelet decomposition. Using vibro acoustic registration nodes vehicles funds allowed to receive signals carrying information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle. Using vibroacoustic registration of vehicles allowed nodes receive signals carry-ing information about the defects of individual units of vehicles. The proposed decoding algorithms signals have high reliability, allow technical inspection, subsequent monitoring of the technical state of the vehicle.

Keywords: vehicle, vibroacoustic diagnostics, dominant information, time-frequency analysis, wavelet analysis

Reviews the basic contents of diversification of thermal power plants, which will contribute to improve environmental and economic performance in the industry.

Keywords: diversification, enterprises of power industry, enrichment of coal, ash dumps, pollution, species blade, air pollution, ash, slag ash, secondary resources.

The composite cathode material of the core@shell type with the LiMn2O4@LiCoO2 formula of has been successfully synthesized using the solid-state reactions in several stages. Its structure has been studied by means of X-ray diffraction, scanning and transmission electron microscopy and vibrational infrared spectroscopy. Electrochemical investigation in two-electrode cell has been showed improvement of characteristics of the synthesized cathode material than the constituent components. The specific power of LiMn2O4@LiCoO2 is 650 mWh/g, against 450 and 500 mWh/g for LiCoO2 and LiMn2O4, respectively.

Keywords: lithium-ion batteries, cathode materials, Delafosse, X-ray structural analysis, electron microscopy, electrochemical properties

Problem research of display the orthogonal projection of four dimensional hypersurface defined by the equation in an implicit form one and two hyperplane. To communicate and bypass hypersurface Discriminants assumes that the hypersurface of the two-parameter family of two-dimensional display received surfaces in five-dimensional space. The analysis of kriminant four dimensional hypersurface orthogonal projection onto the coordinate hyperplane in two coordinate axes. The intersection of three dimensional hypersurfaces axiom (kriminant) defines a two-dimensional surface that is the envelope of the two-parameter family of two-dimensional surfaces. Are the necessary and sufficient conditions of existence of this envelope.
The results obtained are used to study the Discriminants four-dimensional hypersurface, the display of two-parameter family of spheres in a five-dimensional space.  

Keywords: a family of surfaces, hypersurface, envelope, the display features, а discriminant.

The properties of the water-soluble high-modulus silicate systems: based on alkali metal polysilicates called liquid glass and chain their transformation from lower to higher oligomers, with the subsequent formation of colloidal solutions - silica sol. The methods of preparation, properties and applications of water-soluble high-modulus silicate systems. The possibilities of their use as a binder and modifying agents for various nanostructured composite materials. The examples of promising areas of application of liquid glass and high modulus of aqueous solutions of silicates in construction and industry. In particular show the possibility of using liquid glass and aqueous solutions of silicates in the production of nanostructured silicate polymer. In space engineering for manufacturing water-destructed mandrels used in the manufacture of solid rocket motor casings and pressure vessels 'cocoon' of composite materials by winding. The application of the inorganic sol to obtain a nanocomposite ceramics and monolithic blocks of silicon oxide, which can be used in various fields of modern technology. The possibility of using silica sol as a binder for refractory ultra-lightweight shielding materials used to protect equipment from high impacts. The directions of development of the production of new acid-resistant materials and linings for protection of chemical equipment, parts and components operating in corrosive environments.

Keywords: Keywords: water glass, silicate polymer concrete, additives, silicates organic bases tetrafurfuriloksisilan, furfural alcohol, nanostructure composite materials, water-soluble silicates, silica sol, sol-gel transition, cured xerogel water-destructed mandr

The paper contains a description of a new method for automatic generation of maps of goods placement. Map of goods placement created by the author's search algorithm. The algorithm is based on ideas of evolutionary search. The proposed algorithm works with a population of constant size, allows not use complex search methods and for a reasonable time find a solution close to the optimum.

Keywords: simulation, evolutionary computation, multicriteria optimization, genetic algorithms

The analytical decision on definition of a forming wall of the bunker of the greatest capacity is provided in article among all bunkers having identical entrance and exhaust outlets. Such bunkers are intended for a hydraulic type of the expiration of bulk. They reduce a pulsation loose at its exit from the outlet and reduce extent of influence of the dynamic arches by account characteristics of the bunker.

Keywords: sliding lines, entrance openings, outlets, bunker, loose body, expense of the loose.

The solid solution of  LiMn1/3Cr1/3Fe1/3O2 with the structure of α-NaFeO2  isostructural with the widely used LiCoO2  has been synthesized and investigated as a cathode material. Rated voltage of LiMn1/3Cr1/3Fe1/3O2  relative to the lithium is 4 V.  The possibility of charging − discharging the material to a specific capacity of 220-250 mAh/g at currents of C/15-C/50 without phase transformations has been experimentally demonstrated. 

Keywords: lithium-ion batteries, cathode materials, Delafosse, solid solution, X-ray structural analysis, electrochemical properties

The results of calculations on the stability of slope lands treated in a new way. Device intrasoil walls combined with loosened intervals allows prevent subsurface runoff water, which reduces surface erosion slopes, improves the fertility of farmland returns a highly eroded areas in turn, eliminates the wetlands at the foot of the slopes. Established that the stability of the treated soil layer on the slope ample.

Keywords: stability of sloping land, subsurface walls, soil subsurface runoff, soil erosion, wetlands, deep tillage, moisture saturation slope.

Based on the analysis of works of finnish experts shows that learning russian language with learning the finnish language as a foreign supports the development of bilingual identity and language readiness of students. 

Keywords: russian, finnish, teaching.

The combination of the unique, abnormal properties shown by oxidic systems with structure of spinel on the basis of transitional elements chromites draws attention of researchers for many years. Some systems on the basis of transitional elements chromites (for example, nickel and copper chromites) have critical elements (multicritical points, lines of phase transitions of the second sort, etc.) on the phase chart. Near these elements of the phase chart materials possess unique chemical and physical properties. Therefore development methods of receiving and research of phase forming and properties in NIO-CoO-CuO-Cr2O3 system represent fundamental and practical interest for chemistry and technology of inorganic substances. In this work processes of spinel structure formation in system 0,6 NiCr2O4 – 0,2 CoCr2O4 – 0,2 CuCr2O4 from crystal chemistry positions are considered. Formation of two solid solutions on the basis of nickel (II) chromite – with structure of cubic spinel and with tetragonal distorted structure is established. The influence of cooperative Yahn-Teller effect on processes of a spinel forming and on stabilizing impact of chloride of potassium on process of education of  two spinel solid solutions is suggested. Influence of a power factor of cation stabilization in knots of a crystal lattice as one of the important factor in reaction of spinel structure formation is considered.

Keywords: spinels, chromites of transitional elements, Jahn-Teller effect

Nanotechnology is a technological breakthrough in agriculture, have great potential because they allow you to combine economic efficiency and natural ingredients to solve many problems in agriculture. To achieve high efficiency in agricultural production in recent years, using new agrobionanotehnologies. Authors of this article is working on the development of environmentally safe (nano) technology treatment of seeds of different crops using multi multifunctional biologically active (nano) chips. The obtained test results allow us to conclude about the prospect of being developed (nano) technology pre-sowing treatment and training opportunities 1-2 applications for patents on new research conducted in the development of the developed concept of «non-pesticidal agricultural products.

Keywords: agrobionanotehnologies, (nano) chips, pre-sowing seed, sowing qualities

The article suggests technique of optimization of tree cutting and skidding process via felling-skidding machines and felling-skidding-processing machines. The realization of this technique will allow reducing of time costs and raising of machine efficiency taking into account accessibility of stand cutting, relief features and technological working conditions.

Keywords: integrated machine, cutting, tree, timber harvesting, skidding.

In persisting article is offered structure and functional composition of the programme modules of the tools of the analysis dynamic mechanical systems of the class tooth issues. In change from existing, proposed programme complex contains the extended composition of the modules. This enables, in particular, check convergence iteration computing processes, way to visualizations of the current importance of the full kinetic energy of the fluctuations of the under investigation mechanical system. The broughted composition each of block of the programme complex, with detailed description of the purpose included modules into them.

Keywords: The mechanical system, tooth issue, modeling, programme complex, dynamic of the system