This paper is devoted to development of gas sensors air control. It is shown that copper oxides are the promising materials for high sensitive sensors. The CuOx film material was syntheses by means of citrate sol-gel technique. The sensors fabricated on the basis of CuOx film material were sensitive to ammonia gas in the range of 25-150 ppm. Working temperature was determined as 180 °C. Such sensors can be used for work area air control of industrial enterprises.

Keywords: gas-sensitive element, atmospheric air, sensors, copper oxides

  We have investigated electrical and gas sensitive properties of gas sensor based on carbon nanotubes (CNT) and carbon nanotubes modified by metal oxides (such as tin oxide and silicon oxide).  Also we  have find out that modification of  CNT by  metal oxides helps to  improve film`s adhesion to substrate, decrease electrical resistance, recovery time, working temperature , enhance gas sensitivity in comparison with sensitive elements based  only on CNT or metal oxides. Moreover experimental results showed that properties of composite material depend on concentration correlation of solutions. As a result we can get highest sensitivity of sensor element by choosing optimal relation between concentrations of solutions.

Keywords: Сarbon nanotubes, modification, tin oxide, silicon oxide, gas sensor

  Results of researches of gas sensitive properties of zinc oxide films grown by reactive rf magnetron sputtering was shown. Process parameters, affected on the gas-sensitive ratio, response time, recovery time and the type of electrical conductivity of obtained films were identified. Optimal modes of magnetron sputtering of zinc oxide for implementing gas sensors (RF sputtering Zn target in a gas mixture of oxygen and argon at a concentration of 80% oxygen, a chamber pressure of 0.8 Pa and the magnetron power 100 W) were established. Avarage response time on NO2 gas was 5-15 sec.  The obtained values ​​of the gas-sensitivity were in the range 30-67% for NO2 concentrations from 20 to 100 ppm, CO and CO2 from 50 to 100 ppm and 81-97% for higher gas concentrations from 500 to 1000 ppm.  

Keywords: Nanotechnology, magnetron sputtering, zinc oxide, thin films, gas sensitivity

  In this article the mathematical model dynamic process installations for blast cleaning the surface, and clearly showed the graph of the transition process, given the theoretical integer parameters yield in the specific process conditions.

Keywords: Fluid Technology, a dynamic characteristic of the drive, nozzle - gate, jetting processing surface

  Work is connected with the synthesis of information behavior of groups of autonomous intelligent agents of biomedical research, and machine learning methods to ensure the reliability of the forecast increase in their behavior using multi-agent systems based on the use of bionic principles, methods and models of swarm intelligence. Developed multi-agent system simulates the behavior of groups of autonomous intelligent agents developed methods to meet the proposed criteria of reliability, differing form the structure of the system and developed a set of specialized agents that provides the capability to model a group of biomedical robotics using autonomous intelligent agents. Classifier of stabilographic signals on the basis of Parzen method was developed. These data indicate that the auxiliary symptoms resulting from multidimensional scaling much more informative initial attributes.

Keywords: Intelligent agent, multidiagnostics, Parzen classifier

The features of circuit engineering and results of chip computer simulation which consists of 4-channel operational amplifier (op amp) and 2-channel electrometric voltage follower, designed for pre-processing of sensors signals in high-energy physics are considered. 
The characteristic properties of designed op amp are the absence of current source in the input differential stage and the use of parallel high-frequency channel for increasing of the bandwidth and slew rate.
The results of experimental research that have confirmed the low sensitivity of the parameters of designed integrated circuits created on the field programmable gate array "FGPA-1.3" without the horizontal p-n-p transistors to the influence of gamma-irradiation and electrons with energy of 4 MeV are given.  

Keywords: operational amplifier, field programmable gate array, voltage follower, sensor, sensing element, radiation resistance.

  The requirements to be met by a data acquisition system in terms of each of the problems to be solved. Presented electric concept developed biopotential amplifier with a total gain of 2000. The theoretical model of the spectrum of RR intervals and changes depending on the running processes. The analysis revealed that the resulting spectrum satisfies the conditions considered in the theoretical model, and can be further analyzed with fractal characteristics.

Keywords: Instrumental amplifier, biopotential, fractal index

In this article authors give information about problem of fiber-optical communication lines thermal-electric degradation and its consequences and study main reasons and factors which have an influence upon the degree of thermal-electric degradation. Possible and the most promising research ways are examined in this subject area; they let not only study this subject of  fiber-optical communication lines thermal-electric degradation in detail but to solve this problem in whole.

Keywords: electromagnetic field, thermal-electric degradation, fiber-optical communication lines, FOC-cored static wire, kevlar, electrified railway

  The purpose of investigation is to examine the effect of adaptation to difficult-house physical stress on the regulation of the vertical posture of man. For the analysis of the ability to maintain a vertical position used stabilographic hardware-software complex "Stabilan-1-02" (JSK Rhythm ", Russia). The ability to maintain a vertical position was evaluated in two static positions: 1) the main stand (OS) in the presence and absence of visual information, and 2) dip (PP) in the presence of visual information. Revealed that an increase of physical performance ability to maintain balance in static positions, especially in the complicated conditions (deprivation of visual information and static muscle tension) increases.

Keywords: Sports stabilometry, adaptation, vertical pose

Submitted manufacturing operations performed at the landfill site TOP, their main types of negative impacts on the environment. The conditions of formation and emission of biogas generated in the interior of the landfill body and having a pronounced toxic effects. The dependence of the specific biogas yield for the period of his active stable generation.

Keywords: Solid waste consumption, landfill disposal TOP, biogas, wet waste, environmental safety

Consideration of the formation method of choice underlying architecture of reconfigurable computing system minimal cost, providing the requirements for the probability of the task. The main mathematical tool used in the theory of decision making under uncertainty, as well as methods for game-theoretic optimization.

Keywords: reconfigurable computing system, Markov processes, game-theoretic optimization, basic architecture, the uncertainties

Circuit features of the electronics module for avalanche photodiode signal read-out, created on a basis of the specialized analog IC, are considered. Measurement re-sults of characteristics and noise depending on signal source capacity are given.

Keywords: avalanche photo diode, readout electronic, charge sensitive amplifier, shaper, electronics module

In this paper, a new simple and accurate hybrid table/analytical model of the MOSFET drain current based on the interpolation of table parameters is proposed. This new hybrid table model has an accuracy similar to the pure table models but requires no complex parameter extraction. The drain current in the hybrid model is calculated as the product of the analytical model current and the correction factor approximated by two-dimensional series.

Keywords: MOS-transistor, MOSFET parameters, cryogenic temperature, parametric identification

In article the new model of interaction of functional systems of various hierarchical levels is offered: from unicell level, to level over social objects. Feature of model is introduction in its structure: perception filters, the accounting of a strong-willed component, convenience of its application not only in the field of physiology, but also in sociology, psychology, value logy and other sciences describing behavior of reasonable objects. The analysis of signals carrying out exchange of information between functional systems of different level of hierarchy is carried out. The offered model allows explaining and predicting many psycho physiological patterns accompanying conditions of expanded consciousness, and arising at activation of reserve possibilities of the person.

Keywords: functional systems, super consciousness, activation of reserve possibilities

  The superposition conception of endogenous factors influence on the hem lymphatic occupancy in the organism vascular system is presented. The main influence factors creating the wave modulation on the pulse blood and lymph flows in the vessels and liquid’s moving in the around tissues are considered in the physical model. On the basis of the model is justified hemodynamic functional test with dosed compression effects on local areas of the body, in which the reaction is analyzed for changes in the spectrum of signals related to the changes exhibited by volume-dynamic changes in the vessels. Shows the functional scheme of the formation of the wave changes hem lymphatic, allowing planning of the study.

Keywords: Hem lymphatic occupancy, endogenous factors, compression action, spectral analyzing of signals