Using the expression for the dynamic model calculations were performed, identified analytical and graphical relationship between resistance, systemic and the number of enterprises - participants cluster associations to characterize the sustainability of transport and logistics cluster to fluctuations in external traffic

Keywords: transport and logistics cluster, the dynamic model of stability

The article presents a mathematical model of deformation of thin-walled conical shells, considering orthotropic material, geometric nonlinearity and transverse shear. Showing geometric relationships, physical relationships, the functional of total energy of deformation and boundary conditions.

Keywords: conical shell, tapered panel, mathematical model, geometric nonlinearity, orthotropic, lateral shifts

Use nonconventional and renewables has important economic value for energy saving. Lamellar recuperators are applied to a reuse of heat of departing air in system of ventilation of buildings. Its functional mathematical model is developed for increase of energy efficiency and optimization of parameters of work of a lamellar recuperator. On the basis of mathematical model the criterion of optimization is defined and optimum modes of functioning of a recuperator of ventilating air are established. As a result of researches it is established that the heating of external air is necessary for increase of overall performance of a recuperator before an entrance to a recuperator. For the solution of this task it is offered to use soil the heat exchanger.

Keywords: mathematical model, lamellar recuperator, nonconventional power sources, optimization, energy saving

The main issues of competitiveness, assess the quality of services, pricing strategy, especially sales service, new services, cost accounting and auditing in the tourist and recreation industry

Keywords: competitiveness, quality of services, audit, pricing strategy, marketing, tourist and recreational industry.

The main methods of Platycladus orientalis seed propagation are studied. For Platycladus orientalis industrial cultivation the following technologies of reproduction are recommended: For off-sort samples – seed propagation after stratification (25-30 days); For sorts and decorative forms:
1.Vegetative propagation using IAA.
2. Micropropagation of Platycladus orientalis in vitro by means of adventitious shoots induction on the MS medium adding 0,2 – 0,5 mg/l BAP. There are derived well rooted microshoots on the medium with IAA in concentration 5 mg/l.

Keywords: green building, Platycladus orientalis, technologies of reproduction, clonal micropropagation.

A comparison of wheeled and tracked vehicles propulsion forest. It is shown that the bulk of overseas logging operations, the construction of infrastructure facilities, the primary transport of forest produce machines with paddle wheels. It is proved that under natural conditions of production are tracked significant potential movers. Given the requirements of prospective car on the engine power, weight, ground pressure, speed and carrying capacity.

Keywords: crawler gear, wheel propulsion, forest equipment, potential.

It is shown that the competitive advantages of the Republic of Karelia in environmental management are largely determined by natural resources, the state of transport and energy infrastructure, geographical location and can be realized by incorporating state programs initiated by the republican authorities scale innovative programs to implement the " Pudozh megaproject ", " Karelian recreational cluster "and programs for the development of transport and energy infrastructure.

Keywords: Competitive advantages , environmental management , region, resource-based theory .

This paper presents mathematic model of optimization of expenses of stock-piling of timber and logging timber from felling areas to timber consumers by transport networks. This model optimize technological processes which appears during the process of stock-piling of timber and logging timber. 

Keywords: log truck, rail transportation in timber processing complex.

The main laws valid for a series of traffic jams relating to a series of intersections are considered. Their usage facilitates optimization of simulated models of a traffic network section. The problems of traffic jams emergence on the I thoroughfare of Volgograd are investigated with the help of simulated modeling.

Keywords: simulated modeling, series of traffic jams, traffic flows, genetic algorithm, traffic capacity

Acoustic system parameters were selected and calculated: wave modes used when controlling, wave entry and frequency angles according to kind of decay process and ultrasonic attenuation. Control procedure was developed

Keywords: ultrozvuk, frequency, attenuation process, technology, acoustic system

According to the signal theory vocal speech presents a non-stationary random process due to time variation of its main characteristics. A special emotional impact is gained during ensemble and choir performances. The article provides the correlation analysis results and the autocorrelation function of ensemble singing calculated, taking into account the non-stationary nature of acoustic signals. The studies have shown that there is a certain visual resemblance between correlation portraits of a non-professional student ensemble and a non-professional solo singer. At the same time the correlation portrait of student and professional co-performance tends to a professional singer correlation portrait. This helps to make a quantitative assessment of an ensemble’s professionalism which, alongside with a vocal teacher’s subjective assessment, can provide an objective view on singers’ voices condition to optimize the academic voice training process in an ensemble, which is important when using this voice assessing method in music schools, colleges and universities.

Keywords: Vocal speech, acoustic signal, ensemble singing, choir performance, non-stationary random process, autocorrelation function, quantitative assessment

The method of laser therapy is based on synchronization of phases of inflow (anacrotism) and outflow of blood (catacrotism) in the field of the pathological center with phases of a being narrowed and extending laser spot on a projection of this pathological center. It is supposed that being narrowed on a projection of the pathological center the spot of laser light stimulates blood inflow to the spot center, and the extending spot of a laser beam – activates blood outflow in the direction from the spot center to its periphery. The developed technique of the automated correction of hemodynamic frustration consists in pilot signal formation (in charge of the power and laser positioning) for the laser machine on the basis of a difference between a reference rheogram and a rheogram of the patient (a body site) in real time.The offered technique has to allow to use more efficiently methods of laser therapy at treatment of violations of a blood-groove. The technique is calculated on the basis of numerical experiment by means of methods of mathematical model operation.In the real experiment the question of synchronization of the reference and measured signal is considered solved though this task represents a subject of separate researches.The received pilot signal can be in real time transformed to the current signal operating positioning and laser power.The method gives the chance of an operating control of a condition of the patient and blood-groove diagnostics to, in time and after a session of laser therapy. Development provides possibility of adaptive individual correction and optimization of parameters of influence during a session and a course of treatment.

Keywords: laser, therapy, technique, rheogram, diagnostics, blood-groove, management, signal

The report discusses the methods to improve the performance of the server software dispatch center. Asynchronous operations are considered in detail, as the most effective method of increasing the performance of the dispatch center, which is most of the time working with input-output operations. The results were tested on a real project of the dispatch center of high-precision positioning of objects.

Keywords: software dispatch center, methods to improve the productivity, asynchronous operations

Nonstoichiometric tungsten oxides WO3–x and oxide alkaline tungsten bronzes have been studied because of their potential applications in electrochromic devices such as solar panel arrays and “smart windows”. Different phases of 
WO3–x have been considered. In this part we present results of our research which clearly show that all Magneli phases of tungsten oxides  WOx (namely W40O118, W20O58, W5O14, W18O49, W8O23, W3O8) and oxide tungsten bronzes MxMyWO3 at M-Li, Na, K, Rb, Cs. They are characterized by metal – like properties. Their band structures display an energy gap in the valence band just below the Fermi level.
We present results of our electrochemical synthesis of tungsten oxide bronzes in ionic melts of the polytungsten salts. Among the new state – of – the art methods for their manufacture, electrochemical synthesis in ionic melts, which  makes considerably better use of existing technologies, is highly productive, based on the discharge of oxyanions of the polytungstates.  

Keywords: oxide alkali bronzes, alkaline tungsten bronzes, tungsten, molybdenum, nonstoichiometry, tungsten oxides, electroconductivity, electrochromism

Based solutions of avalanche transit diode amplifier for under the influence of microwave amplitude- modulated optical signal at the p-n junction diode is determined by the response of the amplifier , while a detector device characteristic. We investigate the influence of numerous system parameters on product detection.

Keywords: frequency response; avalanche diode; amplifier; detector; Microwave amplitude modulated optical vibration .